Owner manual

BCR/BCR
1.3
GEO/GEO
1.3
EDGE/EDGE
1.3
AREA/AREA1.3OMNI/OMNI
1.3
OMNI
Color
ProII/ProII
1.3
ProII Color
NoNoNoNoYesYesYesYes
Line Detect Tool Input Tab
Adding an Line Detect Tool
1. Click the button of the tool to be added to the inspection.
2. If desired, rename the tool.
3. Draw an ROI.
DescriptionField/Button
Use this field to rename the tool. The default is tool_name_1, tool_name_2, and
so on, where the default tool_name depends on the tool being created (for example,
locate, edge or the like). The name can have only alphanumeric characters and
underscores with no spaces.
Banner Engineering Corp.Minneapolis, MN USA156
2/2010PresencePLUS Software Tools