Owner manual

2.1.3 P4 Cable Connections
Note: The sensor power must be 24V dc ± 10% if a light source is powered by the sensor.
Monitor Cable (to Video Monitor, optional)Crossover Ethernet Cable (to PC Ethernet Port)*
BNC06 —2 m (6')STPX07 — 2.1 m (7')
BNC15 — 5 m (15')STPX25 — 7.6 m (25')
BNC30 — 9 m (30')or
Serial Cable (to PC serial Port)*Standard Ethernet Cable (to PC via Network Hub or
Switch
DB9P06 — 2 m (6')
STP07 — 2.1 m (7')
DB9P15 — 5 m (15')
STP25 — 7.6 m (25')
DB9P30 — 9 m (30')
*The Sensor can be connected to the PC via a serial cable or an Ethernet network; Ethernet provides faster
communication.
DirectionDescriptionWire ColorPin #
OutputRS-232 TX**Yellow1
InputRemote TeachGray2
InputProduct ChangeOrange3
InputExternal TriggerPink4
In/OutDiscrete I/O #1Black5
In/OutDiscrete I/O #2Red6
In/OutDiscrete I/O #3White7
In/OutDiscrete I/O #4Light Blue8
11Minneapolis, MN USABanner Engineering Corp.
System Description2/2010