User Manual

P/N 118000 rev. D 5
Banner Engineering Corp. • Minneapolis, MN U.S.A.
www.bannerengineering.com • Tel: [phone]
Light Connector (3-pin Pico Style)
(Banner lights only)
1 = Brown 24V
2 = n/a
3 = Blue (ground)
4 = Strobe
Ethernet (RJ-45)
NTSC Video
(BNC)
12-pin Discrete
I/O Power/Ground
RS-232 Serial (see pin
assignments below)
components/
connections
components/
connections
12-Wire Cable Pin Assignments
Pin # Wire Color Description Direction
1 Yellow RS-232 TX Output
2 Gray Remote Teach Input
3 Orange Product Change Input
4 Pink External Trigger Input
5 Black Discrete I/O #1 In/Out
6 Red Discrete I/O #2 In/Out
7 White Discrete I/O #3 In/Out
8 Light Blue Discrete I/O #4 In/Out
9 Violet RS-232 RX Input
10 Green RS-232 Signal Ground Output
11 Blue Common (Signal Ground) Input
12 Brown 10-30V dc Input
TIPS
The trigger device
can be any
10-30V dc
photoelectric
sensor, or a
device with a
similar output.
5. Connect the leads on the 12-wire cable to the appropriate
locations (see pin assignments below).
Crossover Ethernet Cable
(to PC Ethernet Port)
STPX07 — 2.1 m (7')
or
STPX25
— 7.6 m (25')
Monitor Cable (to Video Monitor, optional)
BNC06 — 2 m (6')
BNC15
— 5 m (15')
BNC30 — 9 m (30')
Standard Ethernet Cable
(to PC via Network Hub or Switch)
STP07 — 2.1 m (7')
STP25
— 7.6 m (25')
12-Wire Cable Models
P4C06
— 2 m (6')
P4C23
— 7 m (23')
P4C32
— 10 m (32')
P4C50
— 16 m (50')
P4C75
— 23 m (75')