User Manual

14 P/N 118000 rev. D
Banner Engineering Corp. Minneapolis, MN U.S.A.
www.bannerengineering.com Tel: 763.544.3164
Specifications
sensor
specifications
sensor
specifications
Models
Right-Angle Housing In-Line Housing
GEO: P4GR
GEO 1.3: P4G1.3R
EDGE: P4ER
EDGE 1.3: P4E1.3R
BCR: P4BCR
BCR 1.3: P4BC1.3R
AREA: P4AR
AREA 1.3: P4A1.3R
OMNI: P4OR
OMNI 1.3: P4O1.3R
GEO: P4GI
GEO 1.3: P4G1.3I
EDGE: P4EI
EDGE 1.3: P4E1.3I
BCR: P4BCI
BCR 1.3: P4BC1.3I
AREA: P4AI
AREA 1.3: P4A1.3I
OMNI: P4OI
OMNI 1.3: P4O1.3I
Dimensions
* Measured length does not
include connectors or cables
H x W x L:
55.6 x 66.8 x 124.5* mm
(4.9" x 2.63" x 2.2")
H x W x L:
34.3 x 66.8 x 147.3* mm
(1.35" x 2.63" x 5.8")
Mechanical
Construction: Black anodized aluminum
Weight: Approximately 0.29 kg (0.642 lb.)
Environmental Rating: IEC IP20; NEMA 1
Operating Temperature:C to +50˚ C (+32˚ F to +122˚ F)
Maximum Relative Humidity: 90%, non-condensing
Display Options
PC or NTSC video (9 m [30'] max. cable length)
Discrete I/O
1 Remote Teach IN (pin 2) 4 Programmable I/O (pin 5-8)
1 Product Change IN (pin 3) 1 Strobe OUT (light connector pin 4)
1 Trigger IN (pin 4)
Output Configuration
NPN or PNP software selectable
Output Rating
150 mA (each)
ON-State Saturation Voltage: < 1V at 150 mA max. NPN
> V+ - 2 volts
OFF-State Leakage Current: <100 microamps NPN or PNP
Load
+
10-30V dc
PNP Hookup
Communication
• 1 RJ-45 Ethernet
• RS-232 flying leads