User Manual

Printed in USA 08/05 P/N 121996 rev. A

Model P4RE67-G / P4RE67-P Enclosure Kits

Heavy-Duty Enclosure Kits for PresencePLUS

P4 Right-Angle Vision Sensor and Ring Light

Specifications





























Dimensions

• Protects sensor and light during washdown

• Keeps dust and dirt off lens and light

• Prevents vandalism, mischief, and tampering

Features

Environmental Rating

NEMA 6 (IEC IP67)

Chemical Resistance Enclosure: type 304 stainless steel; 18-8 stainless steel fasteners

Gaskets: Open-cell urethane foam

Window: polycarbonate (P model number suffix); glass (G suffix)

Cord grip: polyamide body, fluoroelastomer sealing ring

White inserts: PVC

Temperature

Tolerance

Urethane foam gasket: -40° to +90° C (-40° to +194° F)

Polycarbonate window: -101° to +93° C (-150° to +200° F)

Polyamide cord grip body: -20° to +100° C (-4° to +212° F)

Fluoroelastomer sealing ring: -35° to +204° C (-31° to +400° F)

PVC insert for cord grip: -40° to +80° C (-40° to +176° F)

PAGE 1
® Model P4RE67-G / P4RE67-P Enclosure Kits Heavy-Duty Enclosure Kits for PresencePLUS ®P4 Right-Angle Vision Sensor and Ring Light Features • Protects sensor and light during washdown • Keeps dust and dirt off lens and light • Prevents vandalism, mischief, and tampering Dimensions �� Specifications Printed in USA Environmental Rating NEMA 6 (IEC IP67) Chemical Resistance Enclosure:
PAGE 2
Model P4RE67-G / P4RE67-P Enclosure Kits Installation Disassemble the Enclosure 1. Remove the four M5 slotted screws holding the housing halves together, and remove the upper housing. 2. Remove the three nuts holding the bracket to the lower housing; remove the bracket. Ring Light Mount the Lower Housing Sensor 1. Drill four holes into the mounting surface. Use the base as a template, or see the dimension drawing on page 1. (Mounting holes may be drilled or tapped.) 2.