Manual

P/N 03540 rev. C 7

Banner Engineering Corp.•Minneapolis,MNU.S.A

www.bannerengineering.com•Tel:763.544.3164

E Series OMNI-BEAM™ Sensors

OLM8 Pulse Timer Logic Module

Models OLM8 and OLM8M1 are programmable

for either a one-shot ("single-shot") pulse timer or

a delayed one-shot logic timer. Delay and Pulse

times may be independently adjusted and separately

conﬁgured for either a long or short adjustment range.

OLM8M1 maximum times are 1/10 those of the OLM8.

NOTE 1: DELAY is non-retriggerable.

PULSE is retriggerable if the DELAY time is less than the ONE-SHOT

pulse time.

NOTE 2: if both ranges of the delay function are selected (i.e., if both

1 second and 15 second switches are “on”), the delay time range

becomes 16 (1.6*) seconds, maximum.

NOTE 3: with switches #1 and #2 “off” (no DELAY programmed),

DELAY is adjustable from “negligible” up to 10 (4.5*) milliseconds,

maximum.

Logic Function and Timing Ranges:

models OLM8 and OLM8M1*

Switch Positions

#1 #2 #3 #4

ONE-SHOT 1 (.1) second max. pulse OFF OFF OFF -----

ONE-SHOT 15 (1.5) seconds max. pulse OFF OFF ON -----

DELAYED 1 (.1) second max. delay

ON OFF OFF -----

ONE-SHOT 1 (.1) second max. pulse

DELAYED 15 (1.5) seconds max. delay

OFF ON OFF -----

ONE-SHOT 1 (.1) second max. pulse

DELAYED 1 (.1) second max. delay

ON OFF ON -----

ONE-SHOT 15 (1.5) seconds max. pulse

DELAYED 15 (1.5) seconds max. delay

OFF ON ON -----

ONE-SHOT 15 (1.5) second max. pulse

For normally open outputs (outputs conduct during pulse time) _________ OFF

For normally closed outputs (outputs open during pulse time) __________ ON

*Timing speciﬁcations for model OLM8M1 are printed in (italics).

Overview, continued