User guide

MINI-BEAM DC Sensor with Integral Cable MINI-BEAM DC Sensor with Quick-Disconnect
MINI-BEAM
®
Sensors
SM312F
page
4
Banner Engineering Corp. • Minneapolis, U.S.A.
www.bannerengineering.com • Tel: [phone]
DC Sensors with Attached Cable DC Sensors with Quick Disconnect
(4-Pin Euro-Style)
bn
wh
bu
+
–
bk
Load
Load
10-30V dc
bn
wh
bu
+
–
bk
Load
Load
10-30V dc
Quick Disconnect (QD) Option
DC MINI-BEAM sensors are sold with either a 2 m (6.5') or
a 9 m (30') attached PVC-covered cable, or with a 4-pin
Euro-style QD cable fitting.
DC QD sensors are identified by the letters “QD” in their
model number suffix. For more information on mating
QD cables, see page 5.
4-Pin Euro-Style Pin-out
(Cable Connector Shown)
White Wire
Blue Wire
Black Wire
Brown Wire
12.2 mm (0.48 in)
Mounting Peg
(ø 6.3 mm x 2.5 mm)
ø 3 mm Clearance (2)
M18 x 1 x 19 mm Thread
(Mounting Nut Supplied)
3.2 mm (0.13 in)
57.5 mm (2.27 in)
31.2 mm (1.23 in)
30.7 mm
(1.21 in)
24.1 mm
(0.95 in)
2 m (6.5 ft) Cable
19.1 mm (0.75 in)
Fiber Optic Fitting
M12 x 1 Thread
Quick Disconnect
75.8 mm (2.99 in)
MINI-BEAM Dimensions
MINI-BEAM DC Hookup Diagrams