Manual

page 5
MINI-BEAM
®
Sensors
SM312W and SM312DBZ
Banner Engineering Corp. • Minneapolis, U.S.A.
www.bannerengineering.com • Tel: [phone]
MINI-BEAM Modifications
Description
All MINI-BEAM sensors may be ordered with an integral 9 m (30')
cable in place of the standard 2 m (6.5') cable
Standard dc MINI-BEAM sensors with 1 millisecond output response may
be modified for 0.3 millisecond (300 µs) response.
NOTE: Faster response comes at the expense of lower excess gain.
Also, operating temperature range becomes -20º to +50ºC (-4º to +122ºF)
Model Suffix Modification
MHS
Example of Model
Number
W/30 9 meter (30') cable
Modified for High
Speed
SM312W W/30
SM312WMHS
All MINI-BEAMs may be built
with a 150 mm (6") long
integral cable which is
terminated with the
appropriate QD connector.
QDP
Pigtail Quick
Disconnect
SM312WQDP
Replacement Lens Assemblies
MINI-BEAM lens assemblies are field-replaceable.
Model Description
UC-300BZ
Replacement lens for
DBZ and W models
Right-Angle Reflectors
MINI-BEAM right-angle reflectors are useful for tight sensing
locations. NOTE: These reflectors significantly decrease excess gain.
Model Description
RAR-
300SM
• Side mount reflector
• Profile dimension of 14 mm (0.56") in
the direction of the scan
All MINI-BEAM SM312 dc models
The following cables are available for extending the length of existing sensor cable. These are 30 m (100') lengths of MINI-BEAM cable. This
cable may be spliced to existing cable. Connectors, if used, must be customer-supplied.
Model
Type Used with:
EC312-100 4-conductor
Extension Cables (without connectors)