User Manual

MINI-BEAM
®
Plastic Fiber Optic Sensors – DC Models
page 4
Banner Engineering Corp. • Minneapolis, U.S.A.
Website: http://www.baneng.com • Tel: [phone]
DC Sensors with Attached Cable
MINI-BEAM DC Plastic Fiber Optic Sensor Hookups
MINI-BEAM DC Plastic Fiber Optic Sensor Dimensions
bn
wh
bu
+
–
bk
Load
Load
10-30V dc
bn
wh
bu
+
–
bk
Load
Load
10-30V dc
DC Sensors with Quick-Disconnect
(4-Pin Euro-Style)
42.1 mm
(1.66")
Fiber
Optic
Fitting
22.3 mm
(0.88")
12.2 mm (0.48")
Mounting Peg
(ø 6.3 mm x 2.5 mm)
ø 3 mm Clearance (2)
3.2 mm (0.13")
30.7 mm
(1.21")
24.1 mm
(0.95")
2 m (6.5') Cable
19.1 mm
(0.75")
16.2 mm
(0.64")
MINI-BEAM Models with Integral Cable
20 mm
(0.79")
M12 x 1 Thread
Quick-Disconnect
MINI-BEAM Models with Quick-Disconnect
Accessories
MINI-BEAM Modifications
Description
All MINI-BEAM sensors may be ordered with an integral 9 m (30')
cable in place of the standard 2 m (6.5') cable
Standard dc MINI-BEAM sensors with 1 millisecond output response
may be modified for 0.3 millisecond (300 µs) response.
NOTE: Faster response comes at the expense of lower excess gain. Also,
operating temperature range becomes -20° to +50°C (-4° to +122°F).
Model Suffix Modification
MHS
Example of Model
Number
W/30 9 m (30') cable
Modified for High
Speed
SM312FP W/30
SM312FPMHS
All MINI-BEAMs may be built
with a 150 mm (6") long
integral cable, terminated with
the appropriate QD connector.
QDP
Pigtail Quick-
Disconnect
SM312FPQDP