User Manual

Banner Engineering Corp., 9714 Tenth Ave. No., Minneapolis, MN 55441 Telephone: [phone] FAX (applications) [phone]
MINI-BEAM
®
Sensors SM2A312LV, SM2A312LVAG and SM2A312LP
Micro-Style Quick Disconnect Cables
Cable: PVC jacket, polyurethane connector body, chrome-plated brass coupling nut
Conductors: 22 or 20 AWG high-flex stranded, PVC insulation, gold-plated contacts
Temperature: -40 to +80°C (-40 to +176°F)
Voltage Rating: 250V ac/300V dc (3-pin), 125V ac/150V dc (4-pin)
38 mm max.
(1.5 in)
1/2-20UNF-2B
ø15 mm
(0.6 in)
38 mm max.
(1.5 in)
3-Pin
Straight
MQDC-306
MQDC-315
MQDC-330
2 m (6.5 ft)
5 m (15 ft)
9 m (30 ft)
• MINI-BEAM ac SM2A312
series
Style
ø1/2-20UNF-2B
ø15 mm
(0.6 in)
44 mm max.
(1.7 in)
3-Pin
Right-angle
MQDC-306RA
MQDC-315RA
MQDC-330RA
2 m (6.5 ft)
5 m (15 ft)
9 m (30 ft)
Green Wire
Red/Black
Wire
Red/White
Wire
Model Length Used with: Dimensions Pin-out
WARRANTY: Banner Engineering Corporation warrants it products to be free from defects for one year. Banner Engineering
Corporation will repair or replace, free of charge, any product of its manufacture found to be defective at the time it is returned
to the factory during the warranty period. This warranty does not cover damage or liability for the improper application of
Banner products. This warranty is in lieu of any other warranty either expressed or implied.
WARNING
These photoelectric presence sensors do NOT include the self-checking redundant circuitry
necessary to allow their use in personnel safety applications. A sensor failure or malfunction can result in either
an energized or a de-energized sensor output condition.
Never use these products as sensing devices for personnel protection. Their use as a safety device may create
an unsafe condition which could lead to serious injury or death.
Only MINI-SCREEN
®
, MULTI-SCREEN
®
, MICRO-SCREEN
™
, MACHINE-GUARD and PERIMETER-GUARD Systems, and other
systems so designated, are designed to meet OSHA and ANSI machine safety standards for point-of-operation guarding
devices. No other Banner sensors or controls are designed to meet these standards, and they must NOT be used as sensing
devices for personnel protection.
!