User guide

MINI-BEAM Sensors with Blue LED – DC Models
page 5
Banner Engineering Corp. • Minneapolis, U.S.A.
Website: http://www.baneng.com • Tel: [phone]
Accessories
MINI-BEAM Modifications
Description
All MINI-BEAM sensors may be ordered with an integral 9 m (30')
cable in place of the standard 2 m (6.5') cable.
Standard dc MINI-BEAM sensors with 1 millisecond output
response may be modified for 0.3 millisecond (300 µs) response.
NOTE: Faster response comes at the expense of lower excess gain.
Also, operating temperature range becomes -20º to +50ºC (-4º to
+122ºF).
Model Suffix Modification
MHS
Example of Model
Number
W/30 9 m (30') cable
Modified for High
Speed
SM312CVB W/30
SM312CVBMHS
All MINI-BEAMs may be built
with a 150 mm (6") long
integral cable, which is
terminated with the
appropriate QD connector.
See the Accessories section
for more information.
QDP
Pigtail Quick-
Disconnect
SM312CVBQDP
All MINI-BEAM SM312 dc models
The following cables are available for extending the length of existing sensor cable. These are 30 m (100') lengths of MINI-BEAM cable.
This cable may be spliced to existing cable. Connectors, if used, must be user-supplied.
Model Type Used with:
EC312-100 4-conductor
Extension Cables (without connectors)
Quick-Disconnect Cables
38 mm max.
(1.5")
M12 x 1
ø 15 mm
(0.6")
38 mm max.
(1.5")
The following cables are available for MINI-BEAM DC Series QD models
4-Pin
Euro-style
Straight
MQDC-406
MQDC-415
MQDC-430
2 m (6.5')
5 m (15')
9 m (30')
M12 x 1
ø 15 mm
(0.6")
44 mm max.
(1.7")
White Wire
Blue Wire
Black Wire
Brown Wire
4-Pin
Euro-style
Right-angle
MQDC-406RA
MQDC-415RA
MQDC-430RA
2 m (6.5')
5 m (15')
9 m (30')
Style Model Length Dimensions Pin-out