Owner's manual

MINI-BEAM
®
Sensors - SM2A312DBZ and SM2A312W
page 5
Banner Engineering Corp. • Minneapolis, U.S.A.
Website: http://www.baneng.com • Tel: [phone]
MINI-BEAM Modifications
Description
All MINI-BEAM sensors may be ordered with an integral 9 m (30')
cable in place of the standard 2 m (6.5') cable
Model Suffix Modification
Example of Model
Number
W/30 9 m (30') cable SM2A312W W/30
All MINI-BEAMs may be built
with a 150 mm (6") long
integral cable which is
terminated with the
appropriate QD connector.
QDP
Pigtail Quick-
Disconnect
SM2A312WQDP
Replacement Lens Assemblies
MINI-BEAM lens assemblies are field-replaceable.
Model Description
UC-300BZ Replacement lens for
DBZ and W models
Right-Angle Reflectors
MINI-BEAM right-angle reflectors are useful for tight sensing locations. NOTE: These reflectors significantly decrease excess gain.
Model Description
RAR-300SM
• Side-mount reflector
• Profile dimension of 14 mm (0.56") in the direction of the scan
EC312A-100 2-conductor All MINI-BEAM SM2A312 ac models
The following cables are available for extending the length of existing sensor cable. These 30 m (100') lengths of MINI-BEAM cable may be
spliced to existing cable. Connectors, if used, must be customer-supplied.
Model Type Used with:
Extension Cables (without connectors)