User guide

MINI-BEAM Sensors with Green LED
page 2
Green LED MINI-BEAM Glass Fiber Optic
Excess Gain
Diffuse mode performance based on 90% reflectance white test card
Models Range Cable
Supply
Voltage
Output
Type
Excess Gain
SM312FVG
SM312FVGQD
Range
varies
by
sensing
mode
and
fiber
optics
used
2 m (6.5 ft)
4-Pin Euro QD
10-30V dc
Bipolar
NPN/PNP
1
10
100
1 mm
.04 in
10 mm
.40 in
100 mm
4 in
.1 mm
.004 in
1000
E
X
C
E
S
S
G
A
I
N
DISTANCE
SM312FVG
Diffuse Mode
BT23S Fiber
BT13S Fiber
40 mm
1.5 in
32 mm
1.2 in
24 mm
0.9 in
16 mm
0.6 in
8 mm
0.3 in
0
0
1.0 mm
1.0 mm
0
0.04 in
0.04 in
2.0 mm 0.08 in
3.0 mm
2.0 mm 0.08 in
0.12 in
3.0 mm 0.12 in
DISTANCE
BT23S
BT13S
SM312FVG
Diffuse Mode
Visible Green, 525 nm
Visible Green 525 nm
Green LED MINI-BEAM Plastic Fiber Optic
Excess Gain
Diffuse mode performance based on 90% reflectance white test card
Models Range Cable
Supply
Voltage
Output
Type
Excess Gain
SM312FPG
SM312FPGQD
Range
varies
by
sensing
mode
and
fiber
optics
used
2 m (6.5 ft)
4-Pin Euro QD
10-30V dc
Bipolar
NPN/PNP
1
10
100
1 mm
.04 in
10 mm
.4 in
100 mm
4 in
.1 mm
.004 in
1000
E
X
C
E
S
S
G
A
I
N
DISTANCE
SM312FPG
Diffuse Mode
Plastic Fiber
PBT46U Fiber
20 mm
0.75 in
16 mm
0.60 in
12 mm
0.45 in
8 mm
0.30 in
4 mm
0.15 in
0
0
1.0 mm
2.0 mm
3.0 mm
1.0 mm
2.0 mm
3.0 mm
0
0.04 in
0.08 in
0.12 in
0.04 in
0.08 in
0.12 in
DISTANCE
SM312FPG
Diffuse Mode
PBT46U
For MINI-BEAM Green LED Sensors:
i) 9 m (30 ft) cables are available by adding suffix “W/30” to the model number of any cabled sensor (e.g. - SM312FVG W/30)
ii) Standard models have 1 millisecond output response, models with 0.3 millisecond (300 microsecond) response are available by
adding suffix “MHS” to the model number (e.g. - SM312FVGMHS). Note that this modification reduces the maximum operating
temperature to +50º C (122º F), and reduces sensing range (and excess gain).
iii) A 150 mm (6 in) long pigtail cable with attached QD connector is available by adding suffix “QDP” to the model number
(e.g. - SM312FVGQDP).
iv) A model with a QD connector requires an optional mating cable (see accessories, page 6).