Instruction Manual

page 5
MINI-BEAM
®
Sensors SMA31E/SM2A31R and SMA31EL/SM2A31RL
MINI-BEAM MODIFICATIONS
Description
All MINI-BEAM sensors may be ordered with an integral 9 m (30 ft)
cable in place of the standard 2 m (6.5 ft) cable
Model Suffix Modification
Example of Model
Number
W/30 9 meter (30 ft) cable SM2A31R W/30
All MINI-BEAMs may be built
with a 150 mm (6 in) long
integral cable which is
terminated with the
appropriate QD connector.
QDP
Pigtail Quick
Disconnect
SM2A31RQDP
Apertures
Opposed mode MINI-BEAM sensors may be fitted with apertures which narrow or shape the effective beam of the sensor to more closely match
the size or profile of the object to be sensed. A common example is the use of “line” or “slit” type aperture when wire or thread is be sensed.
Each model contains 20 apertures.
Model Description
AP31-020
AP31-040
AP31-100
AP31-020H
AP31-040H
AP31-100H
AP31-200H
AP31-020V
AP31-040V
AP31-100V
AP31-200V
AP31-DVHX2
0.5 mm (0.02 in) diameter, circular
1.0 mm (0.04 in) diameter, circular
2.5 mm (0.10 in) diameter, circular
0.5 x 6.4 mm (0.02 x 0.25 in), horizontal slotted
1.0 x 6.4 mm (0.04 x 0.25 in), horizontal slotted
2.5 x 6.4 mm (0.10 x 0.25 in), horizontal slotted
5.1 x 6.4 mm (0.20 x 0.25 in), horizontal slotted
0.5 x 12.7 mm (0.02 x 0.50 in), vertical slotted
1.0 x 12.7 mm (0.04 x 0.50 in), vertical slotted
2.5 x 12.7 mm (0.10 x 0.50 in), vertical slotted
5.1 x 12.7 mm (0.20 x 0.50 in), vertical slotted
Kit containing two of each aperture
Replacement Lens Assemblies
MINI-BEAM lens assemblies are field-replaceable.
Model Description
UC-300E
UC-300EL
Replacement lens for E/R
Replacement lens for
EL/RL or use for
extending range of E/R
Right-Angle Reflectors
MINI-BEAM right-angle reflectors are useful for tight sensing
locations. NOTE: These reflectors significantly decrease excess gain.
RAR-
300FM
• Front mount reflector that attaches
directly to the threaded barrel of most
MINI-BEAMs
• Profile dimension of 34 mm (1.35 in)
in the direction of the scan
Model Description
RAR-
300SM
• Side mount reflector
• Profile dimension of 14 mm (0.56 in)
in the direction of the scan