Manualshelf

Instruction Manual

ManualsBrandsBanner ManualsSensorsK50L Independent Push Button Contact
1234
DC-Operated Indicators for Outdoor Applications
For the latest technical information about this product, including specifications, dimensions, and wiring, see www.BannerEngineer-
ing.com.
• Intense levels of light output for outdoor applications
• Controlled field of view for signage and narrow lane use
• May also be used for low-cost vision sensor illumination
• Rugged, cost-effective and easy to install
• Compact devices are completely self-contained — no controller needed
• Up to three colors in one housing
• Immune to ambient light, EMI and RFI interference
• 50 mm diameter with flat profile and 30 mm mounting base
• PNP (sourcing) or NPN (sinking) input type, depending on model
• 15 to 30V dc operation
QPMA
E
U
R
O
-
S
T
Y
L
E
•
P
I
G
T
A
I
L
•
P
U
R
•
C
A
B
L
E
C
A
L
L
F
A
C
T
O
R
Y
Contact Factory for more information
Models
NOTE: Optional sun shield model K50DS is available for enhanced visibility in desert sun brightness levels
(see Sun Shield on page 4).
Model* LED Function** Inputs‡
K50LDGRYPQ 3 Color:
Green, Red, Yellow
PNP
K50LDGRYNQ NPN
K50LDGRBPQ 3 Color:
Green, Red, Blue
PNP
K50LDGRBNQ NPN
Model* LED Function** Inputs‡
K50LDXGXPQ 1 Color: Green PNP/NPN
K50LDXRXPQ 1 Color: Red PNP/NPN
K50LDXYXPQ 1 Color: Yellow PNP/NPN
K50LDXWXPQ 1 Color: White PNP/NPN
K50LDXBXPQ 1 Color: Blue PNP/NPN
* Integral QD models only are listed.
• For 150 mm PVC pigtail with QD, replace Q with QP in model number (example, K50LDGRYPQP).
• For 2 m (6.5’) cable, omit suffix Q from model number (example, K50LDGRYP).
• A model with a QD requires a mating cable (see 4-Pin Euro-Style Cordsets on page 4).
** 3-color models: 6 LEDs per color 1-color models: 18 LEDs per color
Contact factory for other colors and color combinations.
‡ 1-color models are PNP/NPN selectable, depending on hookup.
WARNING: Not To Be Used for Personnel Protection
Never use this product as a sensing device for personnel protection. Doing so could lead to serious injury
or death. This product does NOT include the self-checking redundant circuitry necessary to allow its use in
personnel safety applications. A sensor failure or malfunction can cause either an energized or de-ener-
gized sensor output condition.
EZ-LIGHT™ Indicators — Daylight Visible
P/N 137330 rev. B 3/22/2011
0 137330 7

Summary of content (4 pages)