Owner's manual

ManualsBrandsBanner ManualsSensorsK50FL Sensor Emulator EZ-LIGHT

DC-Operated LED Indicators

For the latest technical information about this product, including specifications, dimensions, and wiring, see www.bannerengineering.com.

Models* Inputs

T8LGYX7PQP PNP

T8LGYX7NQP NPN

• Polycarbonate/ABS alloy housing,

thermoplastic diffuser

• IP67

M18GYX7PQ PNP

M18GYX7NQ NPN

• Nickel-plated brass housing, thermo-

plastic diffuser

• Fully encapsulated IP67

T18GYX7PQ PNP

T18GYX7NQ NPN

• Thermoplastic polyester housing, ther-

moplastic diffuser

• Fully encapsulated IP67

T30GYX7PQ PNP

T30GYX7NQ NPN

• Thermoplastic polyester housing, ther-

moplastic diffuser

• Fully encapsulated IP67

Models* Inputs

K30LGYX7PQ PNP

K30LGYX7NQ NPN

• 22 mm threaded polycarbonate base,

translucent polycarbonate dome

• Fully encapsulated IP67, IP69K

K50LGYX7PQ PNP

K50LGYX7NQ NPN

• 30 mm threaded polycarbonate base,

translucent polycarbonate dome

• Fully encapsulated IP67, IP69K

K50FLGYX7PQ PNP

K50FLGYX7NQ NPN

• Polycarbonate base, translucent poly-

carbonate dome

• Fully encapsulated IP67, IP69K

K80LGYX7PQ PNP

K80LGYX7NQ NPN

• ABS and polycarbonate base, translu-

cent polycarbonate dome

• Electronics fully encapsulated IP67

* A QD model requires a mating cable; see 4-Pin Euro-Style Cordsets on page 3.

T8L Models: Standard pigtail QD models are listed. For integral 4-wire cable model, omit suffix QP (example, T8LGYX7P).

K80L Models: Standard 4-pin Euro integral QD connector models are listed. For terminal-wired model, omit suffix Q (example,

K80LGYX7P).

Other Models: Standard 4-pin Euro integral QD connector models are listed. For 2 m (6.5') integral 4-wire cable model, omit suffix Q

(example, M18GYX7P). For 150 mm (6") PVC pigtail with 4-pin Euro connector, replace suffix Q with QP (example, M18GYX7PQP).

Contact Factory for other colors/color combinations, including: blue, white, orange.

WARNING: Not To Be Used for Personnel Protection

Never use this product as a sensing device for personnel protection. Doing so could lead to serious

injury or death. This product does NOT include the self-checking redundant circuitry necessary to allow

its use in personnel safety applications. A sensor failure or malfunction can cause either an energized

or de-energized sensor output condition.

EZ-LIGHT™ 2-Color Indicators for Use with Sensors

P/N 121900 rev. G 3/10/2011

0 121900 1

Summary of content (4 pages)

PAGE 1
EZ-LIGHT™ 2-Color Indicators for Use with Sensors DC-Operated LED Indicators For the latest technical information about this product, including specifications, dimensions, and wiring, see www.bannerengineering.com.
PAGE 2
EZ-LIGHT™ 2-Color Indicators for Use with Sensors Specifications Supply Voltage and Current T8L models: 10 to 30V dc @ 20 mA max. T18, M18, and K30L models: 10 to 30V dc @ 30 mA max. T30 models: 10 to 30V dc @ 45 mA max. K50L, K50FL, and K80L models: 18 to 30V dc @ 45 mA max. Indicators Entire translucent diffuser or dome provides indication. Green and Yellow, when connected to discrete output of 3-wire or 4-wire sensors. For other colors, contact Factory for availability.
PAGE 3
EZ-LIGHT™ 2-Color Indicators for Use with Sensors 44.6 [1.76"] 80.8 mm (3.18") Ø50 [1.97"] 65.0 mm (2.56") 109.5 mm (4.31") 66.3 mm (2.61") 60.0 [2.36"] 35.0 [1.38"] 65.0 mm (2.56") 2x 5.0 [0.20"] 16.0 [0.63"] 2x 5.5 [0.21"] 4X Ø 5.5 mm (Ø 0.22") Max. Torque 1.12 Nm (10 in–lbf) with supplied screws 17.0 [0.67"] 2x 5.0 [0.20"] 40.0 [1.58"] 4X 8–32 UNC Max. Torque 1.12 Nm (10 in–lbf) Internal Threads ½ - 14 NPSM Max. Torque 2.25 Nm (20 in–lbf) 26.0 mm (1.
PAGE 4
EZ-LIGHT™ 2-Color Indicators for Use with Sensors 4-Pin Euro-Style Double-Ended Quick-Disconnect (QD) Cordsets 4-pin Euro-Style Male Straight/ Female Straight Connectors MQDEC-403SS MQDEC-406SS MQDEC-412SS MQDEC-420SS MQDEC-430SS MQDEC-450SS 4-pin Euro-Style Male Right-Angle/Female Straight Connectors MQDEC-403RS MQDEC-406RS MQDEC-412RS MQDEC-420RS MQDEC-430RS MQDEC-450RS Length 1 m (3') 2 m (6.