User Guide

ManualsBrandsBANNER ManualsOptical SensorBANNER K30 Pro Optical Sensor

Table Of Contents

Quick Start Guide

30 mm Programmable Multicolor RGB Optical Sensor and Indicator

This guide is designed to help you set up and install the K30 Pro Optical Sensor. For complete information on programming,

performance, troubleshooting, dimensions, and accessories, please refer to the Instruction Manual at

www.bannerengineering.com.

Search for p/n 231384 to view the Instruction Manual. Use of this document assumes familiarity with pertinent industry standards

and practices.

• Programmable using Banner's Pro Editor software and Pro Converter Cable

• Up to 7 colors in one device (14 colors using Pro Editor)

• Devices are completely self-contained—no controller needed

• Teachable modes with color feedback for ease of use

• Touchless activation removes the need for physical force to activate

• Rated IP65

• 10 V DC to 30 V DC operation

• Resistant to ambient light, EMI, and RFI interference

• Sensing and indication in one device

WARNING:

• Do not use this device for personnel protection

• Using this device for personnel protection could result in serious injury or death.

• This device does not include the self-checking redundant circuitry necessary to allow its use in

personnel safety applications. A device failure or malfunction can cause either an energized (on) or de-

energized (off) output condition.

Models

** Models with a quick disconnect

require a mating cordset

Family

K30

GRY3 = Programmable Multicolor

(3 Color, 5-Pin)

Color/Control

P = Pro

Q = 5-pin or 8-pin integral

M12 quick disconnect

depending on model **

Connector

M = Momentary

Output

Function

Activation

Method

Output State

A = Normally Open

P AF100 A M

GRY3

Style

AF100 = 100 mm adjustable field*

AF1000 = 1000 mm adjustable field*

* Detection distance can be adjusted through

teach mode or Pro Editor

Max distance = 1000 mm.

GRY4 = Four State, Full Logic Multicolor

(3 Color, 5-Pin)

RGB7 = Programmable Multicolor

(7 Color, 8-Pin)

Overview

The K30 Pro Optical Sensor is an adjustable field optical sensor that can detect a wide variety of materials and objects.

Measurement

Reference Point

D1 D2

Detection Area

Reliable detection of a stationary

and moving object

Detection not

possible

Model D0 (mm) Switch Point D1 (mm) Switch Point D2 (mm)

K30PAF 0 20 1000

K30 Pro Optical Sensor

Original Document

232898 Rev. A

4 January 2023

232898

Summary of content (6 pages)

PAGE 1
K30 Pro Optical Sensor Quick Start Guide 30 mm Programmable Multicolor RGB Optical Sensor and Indicator This guide is designed to help you set up and install the K30 Pro Optical Sensor. For complete information on programming, performance, troubleshooting, dimensions, and accessories, please refer to the Instruction Manual at www.bannerengineering.com. Search for p/n 231384 to view the Instruction Manual. Use of this document assumes familiarity with pertinent industry standards and practices.
PAGE 2
K30 Pro Optical Sensor Wiring Diagrams GRY3 Models NPN 1 1 2 Key 1 – 10-30V dc + 3 4 PNP + 10-30V dc – 3 4 Load 2 1 5 2 Pin 1 = Brown Pin 2 = White Pin 3 = Blue Pin 4 = Black Pin 5 = Gray (Remote Input) Load 2 5 Table 1: GRY3 Multicolor Color/Function Definition Green Yellow X X Input 1 Input 2 Red X X GRY4 Models NPN 1 1 4 1 Remote Input Key + 10-30V dc – 3 Load 2 5 1 – 10-30V dc + 3 4 PNP Pin 1 = Brown Pin 2 = White Pin 3 = Blue Pin 4 = Black Pin 5 = Gray (Remote I
PAGE 3
K30 Pro Optical Sensor RGB7 Models NPN PNP 2 2 – 10-30V dc + 7 1 1 Load 1 8 2 2 4 3 3 Pin 1 = White Pin 2 = Brown Pin 3 = Green Pin 4 = Yellow (Remote Input) Pin 5 = Not used Pin 6 = Not used Pin 7 = Blue Pin 8 = Red + 10-30V dc – 7 3 1 Key Load 3 8 4 Table 3: RGB Multicolor Color/Function Definition Input 1 Red Yellow X X Input 2 Green X X Input 3 Cyan Blue Magenta White X X X X X X X X Configuring a Sensor The K30 Pro Optical Sensor has three Teach modes.
PAGE 4
K30 Pro Optical Sensor Action Result Teach Accepted The indicator stops flashing and the device returns to operation. T Single pulse the remote input. Teach Not Accepted The Signal Level color turns red during the teach procedure, and then the indicator stops flashing. Retry teaching the set point. Figure 1. Remote Input Map Remote Gray/Yellow wire is remote teach input Input Pulse Timing (T) 0.04 seconds < T < 0.
PAGE 5
K30 Pro Optical Sensor Delay at Power-up <1s Environmental Rating IP65 Response Time Switching frequency: 4 Hz Discrete output response: 120 ms Pro Editor Configuration Connection to Pro Editor software enables control of: • Animation: Steady, Flash, Two Color Flash, 50/50, 50/50 Rotate, Chase, Intensity Sweep, Color Sweep, Wave, Double Wave • Color: Green, Red, Yellow, Blue, White, Cyan, Magenta, Amber, Rose, Lime Green, Orange, Sky Blue, Violet, Spring Green • Intensity: Low, Medium, High • Speed: Slo
PAGE 6
K30 Pro Optical Sensor Beam Pattern Figure 2. Typical beam pattern, in millimeters BEAM WIDTH (mm) 100 90% White Card 18% Gray Card 80 60 40 20 0 -20 -40 -60 -80 -100 0 200 400 600 800 1000 DISTANCE (mm) Banner Engineering Corp Limited Warranty Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engineering Corp.