Safety Light Curtain Systems Owner's manual

P/N 68413 rev. A 7
Banner Engineering Corp. • Minneapolis, U.S.A.
www.bannerengineering.com • Tel: [phone]
EZ-SCREEN Point
Instruction Manual
Components and Specifications
2.1 Models Available
Banner EZ-SCREEN Point components may be purchased
individually or in kits. Kits (as indicated below) include one
emitter, one receiver, a keyed reset switch, two cable glands,
two spanner wrenches, a test piece, and standard mounting
hardware for both sensors. When purchased separately, the
emitter and receiver each include mounting hardware for one
sensor, one cable gland, a test piece, and a spanner wrench.
Keyed reset switches are also available separately.
2. System Components and Specifications
CAUTION . . . Proper Model Selection
Ensure proper selection of emitter models, with
respect to range (operating distance) between emitter
and receiver, to minimize the possibility of optical short circuits (see
Sections 2.1 and 3.3.4).
Short-Range Models
(0.8 m - 20 m)
Long-Range Models
(15 m - 70 m)
ACCESS-GUARD Kit
(0.4 to 8 m Operating Range)
Connector
SPE1
Short-Range
Emitter
SPXLE1
Long-Range
Emitter
SPK-AG-1
Short-Range Emitter,
Receiver, Mirrors, Brackets
and Hardware
—
SPR1 Receiver SPR1 Receiver —
SPP1
Sensor Pair
Kit
SPXLP1
Sensor Pair
Kit
—
SPE1Q3 Emitter SPXLE1Q3 Emitter
3-pin Mini-style QD,
(Test input jumpered)
SPE1Q5 Emitter SPXLE1Q5 Emitter
5-pin Mini-style QD,
(Test input available)
SPR1Q8 Receiver SPpR1Q8 Receiver 8-pin Mini-style QD