Safety Light Curtain Systems Owner's manual

P/N 68413 rev. A 21
Banner Engineering Corp. • Minneapolis, U.S.A.
www.bannerengineering.com • Tel: [phone]
EZ-SCREEN Point
Instruction Manual
System Installation
Figure 3-8. Emitter/receiver orientation
3.3.4 Emitter/Receiver Orientation
The emitter and receiver must be mounted vertically, and
parallel to each other. Otherwise dangerous voids in the light
grid could allow objects or personnel to pass undetected through
the grid (see Figure 3-8). Be certain the light grid covers all
access to the guarded area not otherwise protected by hard
guarding or other supplemental guarding.
Floor
Floor
Floor
Floor
E R
E
R
E
R
E R
E
R
E
R
E
R
E
R
Floor
Floor
Floor
Floor
E R
E
R
E
R
E R
E
R
E
R
E
R
E
R
Floor
Floor
Floor
Floor
E R
E
R
E
R
E R
E
R
E
R
E
R
E
R
Good Orientation
emitters and receivers are parallel and
perpendicular to floor and spaced equally from
floor
Floor
Floor
Floor
Floor
E R
E
R
E
R
E R
E
R
E
R
E
R
E
R
Good Orientation
emitters and receivers are parallel (but not plumb),
perpendicular to floor and spaced equally from
floor
Unacceptable Orientation
emitters and receivers are not parallel
Unacceptable Orientation
emitters and receivers are parallel, but not
perpendicular to floor or spaced equally from
floor. Distance from bottom beam to floor does
not comply with applicable standards