User Manual

Interface Modules
Provide forced-guided, mechanically-linked relay (safety) outputs for the EZ-SCREEN System. See Banner data sheet p/n 62822 for
more information.
Interface module (3 N.O. redundant-output 6 amp contacts) IM-T-9A
Interface module (2 N.O. redundant-output 6 amp contacts, plus 1 N.C. auxiliary contact) IM-T-11A
Contactors
If used, two contactors per EZ-SCREEN Type 2 System are required.
10 amp positive-guided contactor 3 N.O., 1 N.C. 11-BG00-31-D-024
18 amp positive-guided contactor 3 N.O., 1 N.C. (N.C. contact rated @ 10 amps) BF1801L024
Lens Shield
Constructed of 1.5 mm clear polycarbonate; attach to sensor using supplied adhesive-backed Neoprene foam strips.
NOTE: The total range decreases by approximately 10% per shield.
Sensor Defined Area Height Lens Shield Model Lens Shield Length
150 mm LSS-150 210 mm (8.3")
300 mm LSS-300 360 mm (14.2")
450 mm LSS-450 510 mm (20.1")
600 mm LSS-600 660 mm (26.0")
750 mm LSS-750 810 mm (31.9")
900 mm LSS-900 959 mm (37.8")
1050 mm LSS-1050 1109 mm (43.7")
1200 mm LSS-1200 1259 mm (49.6")
1350 mm LSS-1350 1409 mm (55.5")
1500 mm LSS-1500 1558 mm (61.3")
1650 mm LSS-1650 1708 mm (67.2")
1800 mm LSS-1800 1858 mm (73.1")
EZ-SCREEN® Type 2 Light Screen Instruction Manual
60 www.bannerengineering.com - tel: [phone] 122452 rev. B