User Manual

Double-Ended Cables
Double-ended cables are generally used to interconnect with a bulkhead connector (see below). They are also useful for extending either
the branch or trunk cables of a model CSB splitter cordset (see Splitter Cordsets on page 59).
Model Number Length Wire Termination
For 8-Pin Emitters and Receivers*
DEE2R-81D 0.5 m (1') 22 gauge 8-pin Double-ended cables, M12/Eu-
ro-style connectors,
female to male (rotateable)
DEE2R-83D 1 m (3')
DEE2R-88D 2.4 m (8')
DEE2R-815D 4.5 m (15')
DEE2R-825D 8 m (25')
DEE2R-850D 15 m (50')
DEE2R-875D 23 m (75')
DEE2R-8100D 30 m (100')
Bulkhead Connector
Model Number Description
PMEF-810D Connector for panel connection of EZ-SCREEN Type
2 emitter and receiver cables. 8-pin Euro-style fe-
male connector with 3 m (10') wires cut to length
(Banner color code); 22 gauge.
3 m
(9.8')
21.5 mm
(0.85")
13.0 mm
(0.51")
M12 x 1
O-Ring
1/4-18NPT
ø 18.0 mm
(0.71")
7.0 mm
(0.28")
EZ-SCREEN® Type 2 Light Screen Instruction Manual
58 www.bannerengineering.com - tel: [phone] 122452 rev. B