User Manual

20 P/N 133487
Banner Engineering Corp. • Minneapolis, U.S.A.
www.bannerengineering.com • Tel: [phone]
Overview
20 P/N 112852 rev. F
Banner Engineering Corp. • Minneapolis, U.S.A.
www.bannerengineering.com • Tel: [phone]
EZ-SCREEN
Instruction Manual
20
Banner Engineering Corp. • Minneapolis, U.S.A.
www.bannerengineering.com • Tel: [phone]
Components and Specifications
Banner Engineering Corp. • Minneapolis, U.S.A.
www.bannerengineering.com • Tel: [phone]
Components and Specifications
Y
L1
L2
L3
65 mm
(2.6")
R13 mm (0.5")
minimum bend
45.2 mm
(1.78")
56.0 mm
(2.20")
4.2 mm
(0.17")
36.0 mm
(1.42")
12 mm*
(0.47")
*For SLS..-150 models, this distance is 52 mm (2")
Figure 2-2. Emitter and receiver mounting dimensions and location of defined area
†Nominal measurement
Emitter / Receiver
Model
Housing Length
L1
Distance Between Bracket Holes
L2 L3
Defined Area
†
Y
SLS..-150
262 mm (10.3") 295 mm (11.6") 237 mm (9.3") 150 mm (5.9")
SLS..-300
372 mm (14.6") 405 mm (16.0") 347 mm (13.7") 300 mm (11.8")
SLS..-450
522 mm (20.6") 555 mm (21.9") 497 mm (19.6") 450 mm (17.7")
SLS..-600
671 mm (26.4") 704 mm (27.7") 646 mm (25.4") 600 mm (23.6")
SLS..-750
821 mm (32.3") 854 mm (33.6") 796 mm (31.3") 750 mm (29.5")
SLS..-900
971 mm (38.2") 1004 mm (39.5") 946 mm (37.2") 900 mm (35.4")
SLS..-1050
1120 mm (44.1") 1153 mm (45.4") 1095 mm (43.1") 1050 mm (41.3")
SLS..-1200
1270 mm (50.0") 1303 mm (51.3") 1245 mm (49.0") 1200 mm (47.2")
SLS..-1350
1420 mm (55.9") 1453 mm (57.2") 1395 mm (54.9") 1350 mm (53.1")
SLS..-1500
1569 mm (61.8") 1602 mm (63.1") 1544 mm (60.8") 1500 mm (59.1")
SLS..-1650
1719 mm (67.7") 1752 mm (69.0") 1694 mm (66.7") 1650 mm (65.0")
SLS..-1800
1869 mm (73.6") 1902 mm (74.9") 1844 mm (72.6") 1800 mm (70.9")
SLS..-1950
2018 mm (79.4") 2051 mm (80.8") 1993 mm (78.5") 1950 mm (76.8")
SLS..-2100
2168 mm (85.4") 2201 mm (86.7") 2143 mm (84.4") 2100 mm (82.7")
SLS..-2250
2318 mm (91.3") 2351 mm (92.6") 2293 mm (90.3") 2250 mm (88.6")
SLS..-2400
2468 mm (97.2") 2501 mm (98.5") 2443 mm (96.2") 2400 mm (94.5")
See page 19 for detailed
bracket dimensions.