User Manual

12 P/N 133487
Banner Engineering Corp. • Minneapolis, U.S.A.
www.bannerengineering.com • Tel: [phone]
Overview
12 P/N 112852 rev. F
Banner Engineering Corp. • Minneapolis, U.S.A.
www.bannerengineering.com • Tel: [phone]
EZ-SCREEN
Instruction Manual
12
Banner Engineering Corp. • Minneapolis, U.S.A.
www.bannerengineering.com • Tel: [phone]
Components and Specifications
Banner Engineering Corp. • Minneapolis, U.S.A.
www.bannerengineering.com • Tel: [phone]
Components and Specifications
(4) M10 Bolt
Pole
40 mm
(1.58") Square
Useable
Stand
Height
127 mm
(5.0")
Base Plate Thickness
6.4 mm (0.25")
Lens Shields
NOTE: The total sensing range decreases by approximately 10% per shield.
Sensor Defined Area
†
Adhesive-Backed Model
(1)
Snap-On Model
(2)
150 mm EZS-150 EZSS-150
300 mm EZS-300 EZSS-300
450 mm EZS-450 EZSS-450
600 mm EZS-600 EZSS-600
750 mm EZS-750 EZSS-750
900 mm EZS-900 EZSS-900
1050 mm EZS-1050 EZSS-1050
1200 mm EZS-1200 EZSS-1200
1350 mm EZS-1350 EZSS-1350
1500 mm EZS-1500 EZSS-1500
1650 mm EZS-1650 EZSS-1650
1800 mm EZS-1800 EZSS-1800
†
Contact factory for lens shield availability for longer sensor lengths.
(1)
Polycarbonate shield guards against weld splatter and weld flash with an adhesive-backed neoprene gasket (see data sheet
p/n 61960).
(2)
Copolyester shield provides heavy-duty, impact-resistant protection from many types of cutting fluids (see data sheet p/n 127944).
Tubular Enclosures
EZA-MBK-2 adapter bracket is required for use with MSA Series stand, see page 14 and data sheet P/N 117107.
Enclosure Model
†
Enclosure Height For EZ-SCREEN Models
EZA-TE-150 439 mm (17.3") SLS..-150
EZA-TE-300
541 mm (21.3
")
SLS..-300
EZA-TE-450
744 mm (29.3
")
SLS..-450
EZA-TE-600
846 mm (33.3
")
SLS..-600
EZA-TE-750 1024 mm (40.3") SLS..-750
EZA-TE-900 1151 mm (45.3") SLS..-900
EZA-TE-1050 1354 mm (53.3") SLS..-1050
EZA-TE-1200 1455 mm (57.3") SLS..-1200
EZA-TE-1350 1608 mm (63.3") SLS..-1350
EZA-TE-1500 1760 mm (69.3") SLS..-1500
EZA-TE-1650 1913 mm (75.3") SLS..-1650
EZA-TE-1800 2065 mm (81.3") SLS..-1800
†
Contact factory for enclosure availability for longer sensor lengths.
Explosion-proof enclosures also
available. Contact factory or visit
www.bannerengineering.com for
more information.
MSA Series Stands (Base Included)*
Stand
Model
Pole
Height
Useable Stand
Height
Overall Stand Height
MSA-S24-1
610 mm (24")
483 mm (19") 616 mm (24.25")
MSA-S42-1
1067 mm (42")
940 mm (37") 1073 mm (42.25")
MSA-S66-1
1676 mm (66")
1550 mm (61") 1682 mm (66.25")
MSA-S84-1
2134 mm (84")
2007 mm (79") 2140 mm (84.25")
MSA-S105-1
2667 mm (105”) 2667 mm (100”) 2673 mm (105.25”)
* Available without a base by adding the suffix “NB” to model number, e.g., MSA-S42-1NB.
Adhesive-backed model shown