Safety Light Curtain Systems Owner's manual

46 P/N 133487
Banner Engineering Corp. •Minneapolis, U.S.A.
www.bannerengineering.com•Tel:763.544.3164
Overview
46 P/N 140044 rev. E
Banner Engineering Corp. •Minneapolis, U.S.A.
www.bannerengineering.com•Tel:763.544.3164
EZ-SCREEN LP
Instruction Manual
System Operation
Status Indicators for Cascaded Applications
When multiple light screens are cascaded, some unique
indications may occur, as indicated in Figure 4-7 and table 4-2.
When a receiver’s CSSI input is in a Stop condition (because
of a blocked light screen further upstream in the cascade, or
because of a Stop signal from an E-stop button, for example),
the display on the downstream receivers, including the master
receiver, will be bracketed by a pair of vertical “goalposts.” See
Section 5.1.1 for an illustration.
Table 4-2. EZ-SCREEN LP Cascade Diagnostics
Condition OSSDs Display
Reset
Indicator
Status
Indicator
Receiver #1 (Master ─ Configured for Latch Operation)
Clear ON ON Green
CSSI Stop
(Receiver #2, 3, or
4 is blocked)
OFF |–| ON Red
Latch OFF Flashing Red
Receiver #2, 3, or 4 (Configured for Trip Operation)
Clear ON ON Green
Blocked OFF #
Beams
blocked
ON Red
CSSI Stop
(Receiver upstream
is blocked)
OFF |–| ON Red
Cleared ON – ON Green
Figure 4-7. Cascade indicator status conditions
Config: Trip
Display: ―
OSSDs: ON
Reset: ON
Status: Green
Cascade Powered Up
Clear
Object is Blocking
Light Screen #4
Object is Blocking
Light Screen #3
Object Has Been Removed;
Cascade is Waiting for Reset
Config: Latch
Display:│–│
OSSDs: OFF
Reset: ON
Status: Red
Config: Latch
Display:│–│
OSSDs: OFF
Reset: ON
Status: Red
Config: Trip
Display:│–│
OSSDs: OFF
Reset: ON
Status: Red
Config: Latch
Display: L
OSSDs: OFF
Reset: Flashing*
Status: Red
Config: Trip
Display: ―
OSSDs: ON
Reset: ON
Status: Green
Config: Trip
Display: ―
OSSDs: ON
Reset: ON
Status: Green
Config: Trip
Display:│–│
OSSDs: OFF
Reset: ON
Status: Red
Config: Trip
Display:│–│
OSSDs: OFF
Reset: ON
Status: Red
Config: Trip
Display: ―
OSSDs: ON
Reset: ON
Status: Green
Config: Trip
Display: # beams
blocked
OSSDs: OFF
Reset: ON
Status: Red
Config: Trip
Display: ―
OSSDs: ON
Reset: ON
Status: Green
Config: Trip
Display: # beams
blocked
OSSDs: OFF
Reset: ON
Status: Red
Config: Latch
Display: L
OSSDs: ON
Reset: ON
Status: Green
Config: Trip
Display: ―
OSSDs: ON
Reset: ON
Status: Green
Config: Trip
Display: ―
OSSDs: ON
Reset: ON
Status: Green
* Waiting for reset