Safety Light Curtain Systems Owner's manual

ManualsBrandsBanner ManualsEquipmentEZ-SCREEN Low-Profile

10 P/N 13140443487

Banner Engineering Corp. •Minneapolis, U.S.A.

www.bannerengineering.com•Tel:763.544.3164

Overview

rev

Banner Engineering Corp. •Minneapolis, U.S.A.

www.bannerengineering.com•Tel:763.544.3164

EZ-SCREEN LP

Instruction Manual

Banner Engineering Corp. •Minneapolis, U.S.A.

www.bannerengineering.com•Tel:763.544.3164

Components and Specifications

Banner Engineering Corp. •Minneapolis, U.S.A.

www.bannerengineering.com•Tel:763.544.3164

Components and Specifications

Splitter Cordsets

Used for easy interconnection between an EZ-SCREEN LP receiver and its emitter, providing a single

“homerun” cable (see Figure 3-22). Model DEE2R-.. double-ended cordsets may be used to extend the QD

trunk or either branch. (Branch #1 and branch #2 cable sections are 300 mm/1' long.) Model QDE-8..D

single-ended cordsets may be used to extend the QD trunk for cut-to-length applications.

Model Trunk Length Wire Pinout

CSB-M1281M1281

CSB-M1288M1281

CSB-M12815M1281

CSB-M12825M1281

0.3 m (1')

2.5 m (8')

4.6 m (15')

7.6 m (25')

22 AWG/

0.33 mm²

CSB-UNT825M1281 8 m (25')

(unterminated)

Pin #1 (+24V dc)

Pin #2 (EDM#2)

Pin #3 (EDM#1)

Pin #4 (OSSD#2)

Pin #5 (OSSD#1)

Pin #6 (0V dc)

Pin #7 (GND)

Pin #8 (RESET)

Pin #1 (+24V dc)

Pin #2 (EDM#2)

Pin #3 (EDM#1)

Pin #4 (OSSD#2)

Pin #5 (OSSD#1)

Pin #6 (0V dc)

Pin #7 (GND)

Pin #8 (RESET)

Pin #1 (+24V dc)

Pin #2 (EDM#2)

Pin #3 (EDM#1)

Pin #4 (OSSD#2)

Pin #5 (OSSD#1)

Pin #6 (0V dc)

Pin #7 (GND)

Pin #8 (RESET)

M12 Male

unterminated

M12 Female

300 mm

(1.0')

see

table

Male M12/Euro to Female M12/Euro QD Cordsets

Used for extending either the branch or trunk of a model

CSB splitter cordset. M12/Euro-style connectors, female to male

(rotateable). Overmold and cables are PVC-jacketed.

Model Length Wire Termination

DEE2R-81D

DEE2R-83D

DEE2R-88D

DEE2R-815D

DEE2R-825D

DEE2R-830D

DEE2R-850D

DEE2R-875D

DEE2R-8100D

0.3 m (1')

0.9 m (3')

2.5 m (8')

4.6 m (15')

7.6 m (25')

9.1 m (30')

15.2 m (50')

22.9 m (75')

30.5 m (100')

8-conductor

cable,

22 AWG/

0.33 mm²

M12/Euro QD

fitting at each

end, one male,

one female

Euro/M12 QD to Flying Leads Cordsets

M12/Euro QD connector on one end; unterminated (cut to length) on other to interface with guarded

machine. PVC-jacketed overmold and cables.

Model Length Wire Termination

Banner Cordset

Pinout/Color Code

European M12

Specification*

Connector

(female face view)

For 8-Pin Emitters and Receivers** Pin Color Function Pin Color Function

QDE-815D

QDE-825D

QDE-830D

QDE-850D

QDE-875D

QDE-8100D

4.5 m (15')

7.6 m (24.9')

9.1 m (30')

15.2 m (49.8')

22.8 m (74.7')

30.4 m (99.7')

22 AWG/

0.33 mm²

8-pin Euro-

style female

connector on

one end; cut

to length

1 Bn +24V dc

2 Or/Bk EDM #2 (Aux)

3 Or EDM #1

4 Wh OSSD #2

5 Bk OSSD #1

6 Bu 0V dc

7 Gn/Ye Gnd/Chassis

8 Vi Reset

1 Wh +24V dc

2 Bn EDM #2 (Aux)

3 Gn EDM #1

4 Ye OSSD #2

5 Gy OSSD #1

6 Pk 0V dc

7 Bu Gnd/Chassis

8 Rd Reset

* * The European M12 Specification pin assignment and color codes are listed as a customer courtesy. The user must verify suitability of these cables for each application.

DEE8-..D Adaptor M12/Euro QD Cordsets

Used to connect 8-pin female QD to a 4-pin or 5-pin cordset

or QD connection to a safety BUS gateway/node, a “smart” self-

monitored safety module, safety controller, or safety PLC. Overmold

and cables are PVC-jacketed.

Model Length Wire Pinout

DEE8-41D

DEE8-48D

DEE8-415D

DEE8-425D

0.3 m (1')

2.5 m (8')

4.6 m (15')

7.6 m (25')

4-conductor

cable,

22 AWG/

0.33 mm²

DEE8-51D

DEE8-58D

DEE8-515D

DEE8-525D

0.3 m (1’)

2.5 m (8’)

4.6 m (15’)

7.6 m (25’)

5-conductor

cable,

22 AWG/

0.33 mm²

* DEE8-4..D cordsets do not have the pin 5 GND/chassis connection. GND/chassis

connection should be made via the mounting hardware.

8-Pin

Female

5-Pin

Male