Owner's manual

P/N 126701 11
Banner Engineering Corp. • Minneapolis, U.S.A.
www.bannerengineering.com • Tel: [phone]
A-GAGE EZ-ARRAY
QuickStart Guide
Components and Specifications
Description Model
Access cover with label – receiver EA5-ADR-1
Access cover security plate (includes 2
screws, wrench)
EZA-TP-1
Wrench, security EZA-HK-1
Standard bracket kit with
hardware (includes 2 end
brackets and hardware to
mount to MSA Series stands)
Black EZA-MBK-11
Stainless
Steel
EZA-MBK-11N
Center bracket kit (includes 1 bracket and
hardware to mount to MSA Series stands)
EZA-MBK-12
2.5 Replacement Parts
Emitter/Receiver Range 400 mm to 4 m (16" to 13')
Field of View Nominally ± 3°
Beam Spacing 5 mm (0.2")
Light Source Infrared LED
Minimum Object Detection Size Straight Scan, Low-Contrast: 5 mm (0.2")
Straight Scan, High-Excess-Gain: 10 mm (0.4")
See Figure 1-5 for other scan mode values; size is tested using a rod.
Sensor Positional Resolution Straight Scan: 5 mm (0.2")
Double-Edge Scan: 2.5 mm (0.1")
Single-Edge Scan: 2.5 mm (0.1")
2.6 Specifications
2.4 Accessory Mounting Brackets and Stands
See Section 2.5 for standard brackets. Order one EZA-MBK-20
bracket per sensor, two per pair.
Model Description
EZA-MBK-20
Universal adaptor bracket
for mounting to engineered /
slotted aluminum framing
(e.g., 80/20
™
, Unistrut
™
).
50.0 mm
(1.97")
58.2 mm
(2.29")
39.2 mm
(1.54")
4.2 mm
(0.17")
44.4 mm
(1.75")
20 mm
(0.79")
40 mm
(1.57")
C
L
EZA-MBK-20
MSA Series Stands (Base Included)*
(4) M10 Bolt
Pole
40 mm
(1.58") Square
Usable
Stand
Height
Base
6.4 mm (0.25")
120.6 mm (4.75")
Stand
Model
Useable Stand
Height
Overall Stand
Height
MSA-S24-1 483 mm (19") 610 mm (24")
MSA-S42-1 940 mm (37") 1067 mm (42")
MSA-S66-1
1549 mm (61") 1676 mm (66")
MSA-S84-1 2007 mm (79") 2134 mm (84")
* Available without a base by adding suffix “NB” to the model number,
e.g., MSA-S24-1NB.
NOTE: Standard
brackets shipped
with sensors connect
directly to MSA series
stands, using hardware
included with the
stands.