Owner manual

P/N 63443 rev. A 3
..-XPE-32 Explosion-Proof Enclosures
Banner Engineering Corp. • Minneapolis, MN U.S.A.
www.bannerengineering.com • Tel: [phone]
(2) Mounting Brackets
(4) M5 x 0.5 x 7 mm Sems Screws
(4) M6 x 1 x 8 Screws
EZ-SCREEN
emitter or receiver
Figure 3. Model SS-XPE-32 Housing with Sensor Mounting Hardware
968 mm
(38.1")
View with Cover Removed
940 mm
(37.0")
82.5 mm
(3.25")
114 mm
(4.50")
117 mm
(4.6")
51 mm
(2.0")
Use 5/16" (8 mm)
Mounting Bolts
(Not Supplied)
Mounting for 20"
MICRO-SCREEN,
MINI-SCREEN or
450 mm EZ-SCREEN
Emitter or Receiver
(Hardware Supplied)
Mounting for 24"
MICRO-SCREEN,
MINI-SCREEN or
600 mm EZ-SCREEN
Emitter or Receiver
(Hardware Supplied)
Mounting for 28"
MICRO-SCREEN
or MINI-SCREEN
Emitter or Receiver
(Hardware Supplied)
User-supplied
Explosion-proof
Conduit and Fitting
(See Warning
on Page 1)
3/4"-NPT
Tap Thru
Cover Bolt Torque: 17 ft-lbs
Figure 4. Enclosure dimensions and features