Instruction Manual

Overview
The D10 Expert Sensor is a high-performance plastic fiber-optic sensor whose many
configuration (TEACH-mode) options make it suitable for demanding applications.
Even with all its features, it is extremely easy to use. Advanced 16-bit microcontroller
technology makes this possible.
The D10 Expert provides high-performance sensing in low-contrast applications. Ex-
pert TEACH and setup options provide static, dynamic and single-point programming
plus manual fine adjustment, remote programming and push button lockout. Its slen-
der, stylized housing has a large digital display visible beneath a clear cover for easy
programming and status monitoring during operation. The sensor mounts directly to
standard 35 mm DIN rail or using the supplied mounting bracket.
The sensor features two outputs with independent setpoints: one of two analog
choices, depending on model, and one discrete (NPN or PNP, also depending on
model). Built-in crosstalk avoidance protocol provides trouble-free operation for multi-
ple sensors in one area.
dynamic
static
Output
Indicators
Output Select
Indicators
4-Digit
Display
Light/Dark
Operate, Clock
and Lock Icons
Programming
Push Buttons
Figure 1. D10 Features
For emitter and receiver port locations, see In-
stallation on page 16
Programming Options
Light/Dark Operate
Selection
Toggle to select the condition for which each output will conduct: when the target is present or when the
target is absent.
OFF-Delay Timing Se-
lection
Programmable OFF-delay pulse stretcher: 0, 2, 5, 10, 15, 20, 30, 40, 60, 80, or 100 ms
Analog Outputs: OFF-delay acts as a smoothing function
Display Selection Discrete Output: Raw signal value or % excess signal
Analog Output: Raw signal value or analog value (0 to 10V dc or 4 to 20 mA)
Power Level/Speed
Selection
Super High-Speed (SHS) High-Speed (HS) High-Power (HP) Super High-Power
(SHP)
Response* 50 μs 200 μs 1 ms 2.5 ms
Repeatability 25 μs 50 μs 75 μs 100 μs
Max
Range*
Fiber Red 680 nm Green 525
nm
Red 680
nm
Green 525
nm
Red 680
nm
Green 525
nm
Red 680
nm
Green 525
nm
PIT16U 20 mm 9 mm 30 mm 9 mm 55 mm 13 mm 90 mm 16 mm
PIT26U 100 mm 40 mm 150 mm 40 mm 250 mm 55 mm 400 mm 70 mm
PIT46U 300 mm 100 mm 550 mm 100 mm 1000 mm 160 mm 1200 mm 180 mm
PIT66U 600 mm 180 mm 1000 mm 180 mm 1700 mm 280 mm 2400 mm 320 mm
PBT16U 6 mm ** 10 mm ** 18 mm 3 mm 30 mm 3.5 mm
PBT26U 30 mm 12 mm 50 mm 12 mm 100 mm 20 mm 150 mm 25 mm
PBT46U 100 mm 30 mm 175 mm 30 mm 250 mm 42 mm 300 mm 60 mm
PBT66U 175 mm 55 mm 250 mm 55 mm 400 mm 80 mm 475 mm 100 mm
Tracking Feature Sets Output 2 to identical settings as Output 1; Output 2 settings can then be revised as desired (see Ad-
vanced Setup on page 13).
D10 Expert™ - Analog and Discrete Outputs
2 www.bannerengineering.com - tel: [phone] P/N 65448_web
rev. F