Safety Interlock Switches Manual

Banner Engineering Corp., 9714 Tenth Ave. No., Minneapolis, MN USA 55441 • Phone: [phone] • www.bannerengineering.com • Email: [e-mail]
Machine Safety Switch – SI-LM40 Series Limit Switch Style
®
P/N 49372 rev. D
WARRANTY: Banner Engineering Corp. warrants its products to be free from defects for one year. Banner Engineering Corp. will repair or replace,
free of charge, any product of its manufacture found to be defective at the time it is returned to the factory during the warranty period. This warranty
does not cover damage or liability for the improper application of Banner products. This warranty is in lieu of any other warranty either expressed or
implied.
WARNING . . .
Spare actuators must NEVER be used to bypass or otherwise defeat the protective function of a safety switch. To do so may create an
unsafe situation which could lead to serious injury or death.
Accessory Actuators
Description Model
Used with
Switch Models
Dimensions
Rigid in-line metal actuator
used for doors or covers.
Slide-bolt design for use
in heavy-duty applications
where alignment is difficult
to maintain.
SI-QM-SB All
40.0 mm
(1.60")
3.0 mm
(0.13")
9.6 mm
(0.40")
20.0 mm
(0.80")
59.0 mm
(2.30")
20.0 mm
(0.80")
100.0 mm
(3.9")
140.0 mm
(5.50")
42.0 mm
(1.70")
38.0 mm
(1.50")
Ø8 mm hole
for locking bolt
in the open
position
31.0 mm
(1.20")
47.0 mm
(1.90")
4x Ø5.5 mm (0.20")
Banner Engineering Corp Limited Warranty
Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment.
Banner Engineering Corp. will repair or replace, free of charge, any product of its manufacture which, at the time it is returned to the factory, is
found to have been defective during the warranty period. This warranty does not cover damage or liability for misuse, abuse, or the improper
application or installation of the Banner product.
THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUDING,
WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING
UNDER COURSE OF PERFORMANCE, COURSE OF DEALING OR TRADE USAGE.
This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO EVENT SHALL BANNER
ENGINEERING CORP. BE LIABLE TO BUYER OR ANY OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS
OF PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES RESULTING FROM ANY PRODUCT DEFECT OR FROM
THE USE OR INABILITY TO USE THE PRODUCT, WHETHER ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT, STRICT
LIABILITY, NEGLIGENCE, OR OTHERWISE.
Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or liabilities
relating to any product previously manufactured by Banner Engineering Corp.