Instructions / Assembly

Handle

Release Valve

Front Wheel

Saddle

Rear Caster

Handle Sleeve

Oil Filler Plug

(refer to parts list for location)

Lifting Arm

Handle securing

bolt / washer

SAFETY AND GENERAL INFORMATION

Save these instructions. For your safety, read, understand, and follow the information provided with and on this

device before using. The owner and/or operator shall have an understanding of the device, its operating characteristics

and safety operating instructions before operating the equipment. The owner and/or operator shall be aware that use

and repair of this product may require special skills and knowledge. Instructions and safety information shall be read

to and discussed with the operator in the operator's native language, making sure that the operator comprehends

their contents, before use of this equipment is authorized. If any doubt exists as to the safe and proper use of this

device, remove from service immediately.

Inspect before each use. Do not use if abnormal conditions such as cracked welds, damaged, loose or missing

parts are noted. Any equipment that appears damaged in any way, is found to be worn, or operates abnormally shall

be removed from service until repaired. If the equipment has been or is suspected to have been subjected to an

abnormal load or shock, immediately discontinue use until inspected by a factory authorized repair facility (contact

distributor or manufacturer for list of authorized repair facilities). It is recommended that an annual inspection be

made by an authorized repair facility. Labels and Operator's Manuals are available from the manufacturer.

PRODUCT DESCRIPTION

This Hydraulic Service Jack is designed to lift, but not support, one end of a vehicle. Immediately after lifting, loads

must be supported by a pair of appropriately rated jack stands. The Heavy Duty Jack Stands are designed to support

rated capacity, partial vehicle loads consisting of one end of a vehicle. Use as a matched pair to support one end

of a vehicle only.

WARNING: Never use a hydraulic jack as a stand-alone device. After lifting, immediately support the lifted

vehicle with a pair of appropriately rated jack stands.

Figure 1 - Service Jack and Jack Stand Nomenclature

Tab

Ratchet

Bar

Locking

Handle

Spring

Locking

Pawl

Base Frame

Collar