User Guide

Quick Start Guide
Imager-based barcode reader with superior decoding capability in a compact housing
This guide is designed to help you set up and install the ABR 3000. For complete information on programming, performance, troubleshooting,
dimensions, and accessories, please refer to the Instruction Manual at www.bannerengineering.com. Search for p/n 207637 to view the In-
struction Manual and for p/n 207635 to view the Barcode Manager Software Instruction Manual. Use of this document assumes familiarity with
pertinent industry standards and practices.
WARNING: Not To Be Used for Personnel Protection
Never use this device as a sensing device for personnel protection. Doing so could lead to serious injury or death. This
device does not include the self-checking redundant circuitry necessary to allow its use in personnel safety applications.
A sensor failure or malfunction can cause either an energized or de-energized sensor output condition.
Models
Table 1: ABR 3000 Models
Model Resolution Lens Lighting Options Communications Codes
ABR3009-WSU2
WVGA
(752 × 480 pixels)
9 mm, manual focus
White
Standard
Serial/USB 1D and 2D
ABR3009-WSE2 Serial/Ethernet 1D and 2D
ABR3009-WSU1 Serial/USB 1D
ABR3009-WSE1 Serial/Ethernet 1D
ABR3106-WSU2
1.2 MP
(1280 × 960 pixels)
6 mm, manual focus
Serial/USB 1D and 2D
ABR3106-WSE2 Serial/Ethernet 1D and 2D
ABR3106-WSU1 Serial/USB 1D
ABR3106-WSE1 Serial/Ethernet 1D
ABR3106-WPU2
Polarized
Serial/USB 1D and 2D
ABR3106-WPE2 Serial/Ethernet 1D and 2D
Features
Figure 1. Models with Serial and Ethernet
1
11
4
3
5
5
8
7
6
9
10
2
1. Smart Teach Interface
2. Ethernet Connection LED
3. Power LED
4. Button
5. Internal Illuminators
6. Good Read LED (green)
7. Lens
8. Aiming System Laser Source
9. Focus Adjustment Screw
10. Ethernet Cable
11. Power - Serial - I/O Cable
Figure 2. Models with Serial and USB
3
1
4
5
5
8
7
6
11
9
Indicators
Figure 3. Indicators—Top of Device
3
4
5
6
7
1
2
Indicator Color LED Status During Normal Operation
1 Power Blue Indicates connection to the power supply
2 Ethernet Connection Amber Indicates connection to the Ethernet network
3
READY/Learn
Green Ready
4
GOOD/Setup
Green Reading successful
5
TRIGGER/Focus (Aim)
Amber
Reading in progress. Do not trigger a new reading attempt until the cur-
rent attempt finishes
6
COM/Test
Amber Active result output transmission on the Main serial or USB ports
7
STATUS
Red No read result
During the reader startup, all of the LEDs turn on for one second.
See
Smart Teach Interface on p. 3 for the colors and meanings of the five LEDs when the reader is in Smart Teach mode.
ABR 3000
Original Document
207636 Rev. B
2021-1-6