Owner's manual

Specifications
12
Banner Engineering Corp. • Minneapolis, U.S.A.
Website:http://www.baneng.com • Tel:888.373.6767
*Measurementmoderesults:
 Beam numberifmeasurementmodeisFBB,FBM,LBB,orLBM
Number of beamsifmeasurementmodeisTBB,TBM,CBB,orCBM
2.3 DeviceNet Attribute Information
I/O Data Attribute Format, Poll and COS
I/O Data Mapping
BYTE BIT 7 BIT 6 BIT 5 BIT 4 BIT 3 BIT 2 BIT 1 BIT 0
0
X
SystemStatus
Bit2
SystemStatus
Bit1
SystemStatus
Bit0
X X
Alignment
Blocked
Alignment
OK
1
LSB–MeasurementMode1*
2
MSB–MeasurementMode1*
3
LSB–MeasurementMode2*
4
MSB–MeasurementMode2*
5
Reserved(always0)
I/O Message Types Polled COS
ProducedDataSize 8bytes 8bytes
ConsumedDataSize 0bytes 0bytes
SYSTEM STATUS: (BYTE 0, NIBBLE 2):
1 EEPROMerror
2 Controllererror
3 ROMerror
4 Normal
5 Emittererror
6 Receivererror
7
Emitter/receiver
mismatch