Owner manual

P/N64118rev.B
Specifications
8
Banner Engineering Corp. •Minneapolis,U.S.A.
www.bannerengineering.com•Tel:763.544.3164
Environmental Rating
Minimum Object Sensitivity
2.5mm(0.1")
NEMA4,13(IP65)
Sensor Scan Time
1.8millisecondsto58.4milliseconds,dependingonscanningmethodandsensorlength;seeSection
5.3.3fordetailedinformation
Power Requirements
12Vdc±2%,suppliedbycontroller
Status Indicators Emitter: RedLEDlightstoindicateproperemitteroperation
Receiver: Greenindicatessensorsaligned
 Yellowindicatesmarginalalignmentofoneormorebeams
 Redindicatessensorsmisalignedoroneormorebeam(s)blocked
Connections
Sensorsconnecttocontrollerusingtwo5-conductorquick-disconnectcables(oneeachforemitterand
receiver),orderedseparately.Seepage5foravailablelengths.UseonlyBannercables,whichincorporate
a“twistedpair”fornoiseimmunity.Cablesmeasure8.1mm(0.32")indiameterandareshieldedand
PVC-jacketed.Conductorsare20gauge(0.9mm).Emitterandreceivercablesmaynotexceed75m
(250')long,each.
Construction
Aluminum,withblackanodizedfinish;acryliclenscover
Operating Conditions Temperature:0°to+50°C(+32°to122°F)
Maximum relative humidity:95%at50°C(non-condensing)
Emitter/Receiver Range
380mmto1.8m(15"to6')
2. Specifications
2.1 Emitter and Receiver Specifications
Certifications