Owner manual

P/N64118rev.B
Installation and Mechanical Alignment
12
Banner Engineering Corp. •Minneapolis,U.S.A.
www.bannerengineering.com•Tel:763.544.3164
3. Installation and Mechanical Alignment
3.1 Emitter and Receiver Mounting
BannerMINI-ARRAYemittersandreceiversaresmall,lightweight,andeasytohandle
duringmounting.Themountingbrackets(supplied)allow±30°rotation.
Fromacommonpointofreference,makemeasurementstolocatetheemitterand
receiverinthesameplanewiththeirmidpointsdirectlyoppositeeachother.Mountthe
emitterandreceiverbracketsusingthevibrationisolatorsandM4Kepsnuts(all
supplied).SeeFigure3-1.StandardM4or#8-32boltsmaybesubstituted(andthe
vibrationisolatorseliminated)insituationswheretheemitterandreceiverarenot
subjectedtoshockorvibrationforces.Whiletheinternalcircuitsoftheemitterand
receiverareabletowithstandheavyimpulseforces,thevibrationisolatorsdampen
impulseforcesandpreventpossibledamageduetoresonantvibrationoftheemitteror
receiverassembly.
Figure 3-1. A-GAGE High-Resolution MINI-ARRAY emitter and receiver mounting hardware
Mounting
Surface
M4 Keps
Nut (8)
M4 x 10 mm
Slotted Hex Head
with Com pres sion
Washer (2)
Mounting
Bracket
Emitter or
receiver
Anti-Vibration
Mount (4)
Mounting
Bracket
Washer
Nut
Studs: M4 x 0.7
9.5 mm (0.38") long