Cut Sheet
Wiring Diagram — 8-Pin Models with 6 to 7 Segments
PNP Input
7
6
2
1
5
4
8
3
Indicator
Color
C1
C2
C3
C4
C5
C6/A
C7/A
12-30V dc
24V ac
NPN Input
7
6
2
1
5
4
8
3
Indicator
Color
C1
C2
C3
C4
C5
C6/A
C7/A
12-30V dc
24V ac
Key:
1 = White
2 = Brown
3 = Green
4 = Yellow
5 = Gray
6 = Pink
7 = Blue
8 = Red
C1 = Color 1
C2 = Color 2
C3 = Color 3
C4 = Color 4
C5 = Color 5
C6 = Color 6
C7 = Color 7
A = Audible
Pins 3 and 8 can activate the corresponding color or the audible function, if available.
Specifications
Supply Voltage and Current
Models with 1 to 5 segments: 18 V dc to 30 V dc; or 24 V ac (± 3 V) at 50 Hz
to 60 Hz (both lights and audible alarms are counted as segments)
Indicators—maximum current per LED color: 45 mA at 18 V to 30 V dc
Models with 6 to 7 segments: 12 V dc to 30 V dc or 24 V ac (± 3 V) at 50 Hz
to 60 Hz (both lights and audible alarms are counted as segments)
Indicators—maximum current per LED color:
• 135 mA at 12 V dc
• 45 mA at 30 V dc
• 60 mA at 24 V ac
Standard Audible Alarm: 25 mA maximum current
Sealed Audible Alarm: 35 mA maximum current
Omni-Directional Sealed Audible Alarm: 45 mA maximum current
Supply Protection Circuitry
Protected against transient voltages
Input Response Time
Indicator On/Off: 10 milliseconds maximum
Audible Alarm
Standard Audible Alarm: 2.7 kHz ± 500 Hz oscillation frequency; maximum
intensity 92 dB at 1 m (3.3 ft) (typical)
Sealed Audible Alarm: 2.9 kHz ± 250 Hz oscillation frequency; maximum
intensity 94 dB at 1 m (3.3 ft) (typical)
Omni-Directional Sealed Audible Alarm: 2.1 kHz ± 250 Hz oscillation
frequency; maximum intensity 99 dB at 1 m (3.3 ft) (typical)
Omni-Directional Sealed Audible Alarm with Intensity Adjustment: 2.1 kHz
± 250 Hz oscillation frequency; maximum intensity 95 dB at 1 m (3.3 ft)
(typical)
Typical Reduction in Sound Intensity with Audible Adjustment (maximum to
minimum)
• Standard Audible: 30 dB
• Sealed Audible: 20 dB
• Omni-Directional Sealed Audible: 12 dB
Audible Adjustment
Standard Audible Alarm: Unscrew the cover (up to 1.5 turns maximum) to
adjust the audible intensity. (Do not exceed 1.5 turns or the cover may
detach during operation.) For maximum intensity, rotate the center plug
180° counterclockwise to remove it.
Sealed Audible Alarm and Omni-Directional Sealed Audible Alarm with
Intensity Adjustment: Rotate the front cover until the desired intensity is
reached.
Omni-Directional Sealed Audible Alarm: No adjustment.
Indicators
LEDs are independently selected; 1 to 7 colors depending on model
Indicator Characteristics
Color
Dominant Wavelength
(nm) or Color
Temperature (CCT)
Color
Coordinates
5
Lumen
Output
(Typical at
25 °C)
x y
Green 528 nm – – 23.0
Red 625 nm – – 7.5
Yellow 590 nm – – 5.0
Blue 470 nm – – 4.0
Orange 608 nm – – 15.5
White 6000 K – – 21.0
Turquoise – 0.19 0.37 5.5
Violet – 0.20 0.08 2.5
Magenta – 0.35 0.15 3.0
Sky Blue – 0.19 0.26 12.0
5
Refer to CIE 1931 chromaticity diagram or color chart, to show equivalent color with indicated color coordinates.
TL50 Tower Light
4 www.bannerengineering.com - Tel: +1-763-544-3164 P/N 142406 Rev. P