Instruction Manual
Table Of Contents
- Contents
- 1 Product Description
- 2 Installation Instructions
- 3 Getting Started
- 4 Banner Radar Configuration Workspace
- 5 Configuring a Sensor
- 6 Specifications
- 7 Update the Software
- 8 Accessories
- 9 Product Support and Maintenance
- Index
4.4.3 Discrete 1 Tab
The following are the parameters on the Discrete 1 tab on the Sensor Settings pane.
Output Mode
Select Switch Point or Window.
Switch Point: The distance at which the switch point threshold is placed.
Window: Define two set points to create window limits.
Distance Settings
Define the set point(s) and the hysteresis.
Output Settings
NO/NC: Select Normally Open or Normally Closed from the list.
On Delay: Set an on delay in milliseconds. The maximum time is 60,000 ms.
Off Delay: Set an off delay in milliseconds. The maximum time is 60,000 ms.
Response Time
Calculates the total response time, taking into account the general response speed and on or off delays.
Table 2: Discrete
Response Speed Discrete Output ON Spec (ms) Discrete Output OFF Spec (ms)
Fast 6 6
Medium 50 100
Slow 200 500
4.4.4 Discrete 2 Tab
The following are the parameters on the Discrete 2 tab on the Sensor Settings pane. This tab is available for dual discrete
models.
Output Mode
Select Switch Point, Window, Complementary, or Pulse Pro/PFM.
Switch Point: Set a single switch point for the output to change.
Window: Define two setpoints to create window limits.
Complementary: Output 2 will be opposite of Output 1.
Pulse Pro/PFM: Pulse Pro/PFM output to interface with Banner lights or a PLC with PFM inputs.
Distance Settings
Available when Output Mode is set to Switch Point or Window.
Define the set point(s) and the hysteresis.
Output Settings
Available when Output Mode is set to Switch Point or Window.
NO/NC: Select Normally Open or Normally Closed from the list.
On Delay: Set an on delay in milliseconds. The maximum time is 60,000 ms.
Off Delay: Set an off delay in milliseconds. The maximum time is 60,000 ms.
Response Time
Calculates the total response time, taking into account the general response speed and on or off delays.
Table 3: Discrete
Response Speed
Discrete Output ON Spec (ms) Discrete Output OFF Spec (ms)
Fast 6 6
Medium 50 100
Slow 200 500
R-GAGE
®
T30R Sensor
12 www.bannerengineering.com - Tel: + 1 888 373 6767