Instruction Manual
Table Of Contents
- Contents
- 1 Product Description
- 2 Installation Instructions
- 3 Getting Started
- 4 Banner Radar Configuration Workspace
- 5 Configuring a Sensor
- 6 Specifications
- 7 Update the Software
- 8 Accessories
- 9 Product Support and Maintenance
- Index
1.3 Features and Indicators
Figure 2. T30R Features
1
2
5
6
3
4
LED Color Description
1 Power Green Power ON
2
Signal
Strength
Red
Flashes in proportion to the signal
strength
3 Output 1 Amber
Target is within the taught analog
span or discrete output status
4 Output 2 Amber Discrete output status
5 NO/NC Amber
Normally open/normally closed
status of discrete output
Dual discrete models have two LEDs
6 n/a n/a Output Teach buttons
Signal Strength and the Indicator LEDs
Signal Strength LED
Off: The signal strength less than one.
Flashing: The flashing is in proportion to the signal strength. The frequency increases as the signal strength
increases from greater than 1× the user-selected signal strength threshold to 4× the signal strength threshold.
On: The signal strength is greater than 4× the user-selected signal strength threshold.
Output LEDs
Indicate that a target is present within the taught range and the signal strength is above the required signal strength
threshold.
R-GAGE
®
T30R Sensor
www.bannerengineering.com - Tel: + 1 888 373 6767 5
Preliminary