Instruction Manual

1 Product Description
Radar-Based Sensors for Detection and Measurement of Moving and Stationary Targets
• FMCW radar detects moving and stationary objects
• Adjustable sensing field—ignores objects beyond setpoint
•
Easy setup and configuration of range, sensitivity, and output using the Banner
Radar Configuration Software
• Sensing functions are immune to wind, fog, steam, and temperature changes and
resistant to rain and snow
• Compact, rugged IP67 housing withstands harsh environments
• Available in a variety of beam patterns, including models optimized for near-range
sensing
WARNING:
• Do not use this device for personnel protection
• Using this device for personnel protection could result in serious injury or death.
•
This device does not include the self-checking redundant circuitry necessary to allow its use in
personnel safety applications. A device failure or malfunction can cause either an energized (on)
or de-energized (off) output condition.
1.1 Models
The lens on the sensor and the bandwidth the sensors scans affects the performance of the sensor.
T30R-1515 models have a rounded lens that helps focus the signal and creates a narrower sensing beam.
Table 1: T30R-1515 Models
Models
1
Beam
Pattern
Detection
Range
Connection Supply Voltage Telecom Approved Output
T30R-1515-KIQ
15 x 15
degrees
0.15 m to 15
m (0.5 ft to
49.2 ft)
Integral M12
quick disconnect
10 V DC to 30 V DC
US, Europe, UK,
Australia, New Zealand,
and Malaysia
Analog current
(4 mA to 20 mA and 1
NPN/PNP discrete), IO-Link
T30R-1515-KUQ 12 V DC to 30 V DC
Analog voltage
(0 V to 10 V or 0.5 V to 4.5
V, and 1 NPN/PNP discrete),
IO-Link
T30R-1515-KDQ 10 V DC to 30 V DC
Dual discrete
(NPN/PNP), Pulse Pro, IO-
Link
The T30R-4545 models have a flat lens which allows for a much wider sensing beam.
Table 2: T30R-4545 Models
Models
1
Beam
Pattern
Detection
Range
Connection Supply Voltage Telecom Approved Output
T30R-4545-KIQ
45 x 45
degrees
0.30 m to 10
m (1 ft to
32.8 ft)
Integral M12
quick disconnect
10 V DC to 30 V DC
US, Europe, UK,
Australia, New Zealand,
and Malaysia
Analog current
(4 mA to 20 mA and 1
NPN/PNP discrete), IO-Link
T30R-4545-KUQ 12 V DC to 30 V DC
Analog voltage
(0 V to 10 V or 0.5 V to 4.5
V, and 1 NPN/PNP discrete),
IO-Link
T30R-4545-KDQ 10 V DC to 30 V DC
Dual discrete
(NPN/PNP), Pulse Pro, IO-
Link
1
Integral 5-pin M12 quick disconnect models are listed. To order the 150 mm (6 in) PUR cable model with a M12 quick disconnect, replace the suffix
'Q" with "QP" in the model number. For example, T30R-1515-KIQP.
R-GAGE
®
T30R Sensor
www.bannerengineering.com - Tel: + 1 888 373 6767 3
Preliminary