Cut Sheet

ManualsBrandsBanner Engineering ManualsControl & AutomationSM30 Series, 150M, (6.5 Ft) Cable

Table Of Contents

Datasheet

Opposed-Mode Infrared Photoelectric Sensors for Especially Demanding Applicaons

• Stainless steel or plasc barrel models

• Very high excess gain; 150 m (500 ) sensing range; 880 nm Infrared LED

•

Posive sealing eliminates even capillary leakage; lens is quad-ring sealed; exceeds NEMA

6P (IP67) rangs – ideal for equipment wash-down environments

• EZ-BEAM

technology provides reliable sensing without the need for adjustment

•

Modulaon frequency “A” is standard; frequencies “B” and “C” also available for

prevenng crosstalk in mulple-sensor applicaons (emier and opposed receiver

frequencies must match)

• AC- and DC-operated receiver models available; emiers feature Universal voltage

• Range for all models: 150 m (500 )

WARNING: Not To Be Used for Personnel Protecon

Never use this device as a sensing device for personnel protecon. Doing so could lead to serious injury or death.

This device does not include the self-checking redundant circuitry necessary to allow its use in personnel safety

applicaons. A sensor failure or malfuncon can cause either an energized or de-energized sensor output

condion.

Models

Modulaon

Frequency

Housing Cable

Power Supply Output Type

A B C

Emier Models

SMA30PEL SMA30PELB SMA30PELC

Plasc

2 m (6.5 ) 2-wire Cable

Universal: 12 to 240

V ac, 10 to 30 V dc

–

SMA30PELQD SMA30PELQDB SMA30PELQDC 3-pin Mini-style QD

SMA30SEL SMA30SELB SMA30SELC

Stainless Steel

2 m (6.5 ) 3-wire Cable

SMA30SELQD SMA30SELQDB SMA30SELQDC 3-pin Mini-style QD

DC Receivers

SM30PRL SM30PRLB SM30PRLC

Plasc

2 m (6.5 ) 4-wire Cable

10 to 30 V dc

Bi-Modal

™

NPN or

PNP

SM30PRLQD SM30PRLQDB SM30PRLQDC 4-pin Mini-style QD

SM30SRL SM30SRLB SM30SRLC

Stainless Steel

2 m (6.5 ) 4-wire Cable

SM30SRLQD SM30SRLQDB SM30SRLQDC 4-pin Mini-style QD

AC Receivers

SM2A30PRL SM2A30PRLB SM2A30PRLC

Plasc

2 m (6.5 ) 2-wire Cable

24 to 240 V ac

SPST Solid-state,

L.O.

SM2A30PRLQD SM2A30PRLQDB SM2A30PRLQDC 3-pin Mini-style QD

SM2A30SRL SM2A30SRLB SM2A30SRLC

Stainless Steel

2 m (6.5 ) 3-wire Cable

SM2A30SRLQD SM2A30SRLQDB SM2A30SRLQDC 3-pin Mini-style QD

SM2A30PRLNC SM2A30PRLNCB SM2A30PRLNCC

Plasc

2 m (6.5 ) 2-wire Cable

SPST Solid-state,

D.O.

SM2A30PRLNCQD SM2A30PRLNCQDB SM2A30PRLNCQDC 3-pin Mini-style QD

SM2A30SRLNC SM2A30SRLNCB SM2A30SRLNCC

Stainless Steel

2 m (6.5 ) 3-wire Cable

SM2A30SRLNCQD SM2A30SRLNCQDB SM2A30SRLNCQDC 3-pin Mini-style QD

Any emier and receiver shown here can be used together, if they have the same modulaon frequency.

Standard 2 m (6.5 ) cable and integral QD models are listed. Models with a quick disconnect require a mang cordset. To order the 9 m (30 ) PVC cable model,

add the sux "W/30" to the cabled model number. For example, SM30PRLBW/30.

AC models with QD require SM30CC model cables.

SM30 Series 30 mm Barrel Sensors

Original Document

03541 Rev. G

25 May 2017

03541

Summary of content (5 pages)

PAGE 1
SM30 Series 30 mm Barrel Sensors Datasheet Opposed-Mode Infrared Photoelectric Sensors for Especially Demanding Applications • • • • • • • Stainless steel or plastic barrel models Very high excess gain; 150 m (500 ft) sensing range; 880 nm Infrared LED Positive sealing eliminates even capillary leakage; lens is quad-ring sealed; exceeds NEMA 6P (IP67) ratings – ideal for equipment wash-down environments EZ-BEAM® technology provides reliable sensing without the need for adjustment Modulation frequency “A”
PAGE 2
SM30 Series 30 mm Barrel Sensors Wiring Diagrams Key 1 = Brown (red/black for QD emitters/receivers) 3 = Blue (red/white for QD emitters/receivers) 4 = Green (green for QD emitters/receivers) Emitters—Cabled Emitters—QD AC Receivers—Cabled AC Receivers—QD 1 1 10-30V dc or 12-240V ac 3 1 10-30V dc or 12-240V ac 3 1 4 4* 24-240V ac 3 Load 24-240V ac 3 4 Load 4* Note: AC emitters are not polarity-sensitive when powered by dc voltage.
PAGE 3
SM30 Series 30 mm Barrel Sensors Specifications Supply Voltage and Current Emitters: 12 to 240V ac (50/60 Hz) or 10-30V dc at 20 mA, 10% maximum ripple DC Receivers: 10 to 30V dc at 10 mA maximum (exclusive of load); 10% maximum ripple AC Receivers: 24 to 240V ac (50/60 Hz) Environmental Rating Exceeds NEMA 6P and IEC IP67 Supply Protection Circuitry Protected against reverse polarity and transient voltages Operating Conditions Temperature: −40 °C to +70 °C (−40 °F to +158 °F) 90% at +50 °C maximum rela
PAGE 4
SM30 Series 30 mm Barrel Sensors Performance Curves Excess Gain Curve Beam Pattern 100000 SM30 Series Opposed Mode 10000 E X C E S S G A I N 1500 mm SM30 Series 60 in 1000 mm Opposed Mode 40 in 500 mm 20 in 0 0 1000 100 500 mm 20 in 1000 mm 40 in 1500 mm 60 in 0 10 45 m 150 ft 90 m 300 ft 135 m 450 ft 180 m 600 ft 225 m 750 ft DISTANCE 1 1m 3.
PAGE 5
SM30 Series 30 mm Barrel Sensors Brackets SMB30A • Right-angle bracket with curved slot for versatile orientation • Clearance for M6 (¼ in) hardware • Mounting hole for 30 mm sensor • 12-ga. stainless steel 45 C 61 B A 69 Hole center spacing: A to B=40 Hole size: A=ø 6.3, B= 27.1 x 6.3, C=ø 30.5 SMB30MM • 12-ga.