Cut Sheet

Quick Start Guide
This guide is designed to help you set up and install the TL70 Modular Tower Light. For complete informaon on programming, performance,
troubleshoong, dimensions, and accessories, please refer to the Instrucon Manual at www.bannerengineering.com. Search for p/n 182214 to view the
Instrucon Manual. Use of this document assumes familiarity with pernent industry standards and pracces.
Conguring the Modules
1
2 3 4 5 6 7 8
9
10
Turn on the appropriate DIP switch to set the order of the components, counng up from the tower light's base.
Module 1
Module 2
Module 3
Module 4
Module 5
Module 6
Base
Assembly Opons
DIP Switches
1 2 3 4 5 6 7 8
Light and Standard
Audible
Components
Module 1 ON
Module 2 ON
Module 3 ON
Module 4 ON
Module 5 ON
Module 6 ON
Light Module Flash
Rate
3 Hz ON OFF
1.5 Hz ON ON
Solid On* OFF OFF
Standard Audible
Module Sengs
Pulse 1.5 Hz ON OFF
Chirp Alarm ON ON
Siren Alarm OFF ON
Connuous
Alarm*
OFF OFF
Assembly Opons
DIP Switches
1 2 3 4 5 6 7 8 9 10
Loud Audible
Module
Sengs
Pulse 1.5 Hz ON OFF
Chirp Alarm ON ON
Siren Alarm OFF ON
Connuous
Alarm*
OFF OFF
Low Intensity OFF OFF
Med. Intensity ON OFF
Med./Loud
Intensity
OFF ON
Loud Intensity ON ON
* Factory default seng
TL70 Modular Tower Light
Original Document
182215 Rev. G
10 October 2017
182215