Installation Manual

Installation Guide
For complete technical information about this product, including dimensions, accessories, and specifications, see http://
www.bannerengineering.com and search for your model number. See also document 121522.
WARNING: Not To Be Used for Personnel Protection
Never use this device as a sensing device for
personnel protection. Doing so could lead to serious
injury or death. This device does not include the self-
checking redundant circuitry necessary to allow its use in
personnel safety applications. A sensor failure or
malfunction can cause either an energized or de-energized
sensor output condition.
Models
Sensing Mode Range LED Output Model
1
OPPOSED
20 m (66 ft) Infrared 950 nm
- S186E
NPN S18SN6R
PNP S18SP6R
RETRO
2 m (79 in) Infrared 950 nm
NPN S18SN6L
PNP S18SP6L
P
POLAR RETRO
2
2 m (79 in) Visible Red 680 nm
NPN S18SN6LP
PNP S18SP6LP
DIFFUSE
100 mm (4 in)
Infrared 880 nm
NPN S18SN6D
PNP S18SP6D
300 mm (12 in)
NPN S18SN6DL
PNP S18SP6DL
FIXED-FIELD
25 mm (1 in) cutoff
Infrared 880 nm
NPN S18SN6FF25
PNP S18SP6FF25
50 mm (2 in) cutoff
NPN S18SN6FF50
PNP S18SP6FF50
100 mm (4 in) cutoff
NPN S18SN6FF100
PNP S18SP6FF100
1
Standard 2 m (6.5 ft) cable models are listed.
• To order the 9 m (30 ft) cable models, add suffix W/30 (for example, S186E W/30).
• To order the 4-pin M12/Euro-style QD models, add suffix Q (for example, S186EQ). A model with a QD connector
requires a mating cable.
2
Use polarized models when shiny objects will be sensed.
S18 Series Sensors (DC Voltage)
Original Document
116159 Rev. B
15 September 2016
116159