Cut Sheet

Installaon Guide
For complete technical
informaon about this product, including dimensions, accessories, and specicaons, see
www.bannerengineering.com and search for your model number. See also document 121522.
WARNING: Not To Be Used for Personnel Protecon
Never use this device as a sensing device for personnel
protecon. Doing so could lead to serious injury or death. This
device does not include the self-checking redundant circuitry
necessary to allow its use in personnel safety applicaons. A
sensor failure or malfuncon can cause either an energized or de-
energized sensor output condion.
Models
Sensing Mode
Range LED Output Model
1
OPPOSED
20 m (66 ) Infrared 950 nm
- S186E
NPN S18SN6R
PNP S18SP6R
RETRO
2 m (79 in) Infrared 950 nm
NPN S18SN6L
PNP S18SP6L
P
POLAR RETRO
2
2 m (79 in) Visible Red 680 nm
NPN S18SN6LP
PNP S18SP6LP
DIFFUSE
100 mm (4 in)
Infrared 880 nm
NPN S18SN6D
PNP S18SP6D
300 mm (12 in)
NPN S18SN6DL
PNP S18SP6DL
FIXED-FIELD
25 mm (1 in) cuto
Infrared 880 nm
NPN S18SN6FF25
PNP S18SP6FF25
50 mm (2 in) cuto
NPN S18SN6FF50
PNP S18SP6FF50
100 mm (4 in) cuto
NPN S18SN6FF100
PNP S18SP6FF100
1
Standard 2 m (6.5 ) cable models are listed.
• To order the 9 m (30 ) cable models, add sux W/30 (for example, S186E W/30).
• To order the 4-pin M12/Euro-style QD models, add
sux Q (for example, S186EQ). A model with a QD connector requires a mang
cable.
2
Use polarized models when shiny objects will be sensed.
S18 Series Sensors (DC Voltage)
Original Document
116159 Rev. C
26 January 2017
116159