User's Manual

Output power control
For output power regulation as described in 15.247(b)(2), permitted output power
vs. hopping channels is as follows:
The control firmware limits output power to less than 24 dBm when utilizing less than 50
channels, and less than 30 dBm when utilizing 51-64 channels.
Antenna Choices
The following classes of antennas ( Table 1 ) were tested and approved for use with the RM7023.
The device is always professionally installed and uses unique connectors. Installation
instructions dictate that power must be attenuated with some antenna choices to comply with the
EIRP limit of 36 dBm (4 Watts).