User's Guide

SureCross™ 1 Watt Data Radio
P/N 132031 7
Banner Engineering Corp. • Minneapolis, MN U.S.A.
www.bannerengineering.com • Tel: [phone]
General
Power* +10 to 30V dc (For European applications: +10 to 24V dc, ±10%)
Power Consumption
Mounting #10 or M5 (M5 hardware included)
M5 fasteners – Max. Tightening Torque 0.56 N•m (5 in•lbf)
Case Material Polycarbonate
Weight 0.26 kg (0.57 lb.)
Indicators Two LED, bi-color
External Cable Glands One 1/2 NPT type
Cable Glands, Max Tightening Torque 0.56 N•m (5 in•lbf)
Radio
Range, with standard 2 dB antenna*
Frequency 902 to 928 MHz ISM band
Transmit Power +30 dBm Conducted
Spread Spectrum Technology FHSS (Frequency Hopping Spread Spectrum)
Antenna Connector Ext. Reverse Polarity SMA - 50 Ohms
Antenna - Max Tightening Torque 0.45 N•m (4 in•lbf)
Link Timeout Configurable, up to 2 minutes
Specifications
Many of the DX80 parameters are configurable. The values in the tables represent factory defaults unless otherwise noted.
Communications
Interface 2-wire RS-485
Baud Rates 9.6k, 19.2k (default), or 38.4k
Data Format 8 data bits, no parity, 1 stop bit
Protocol Modbus RTU
* Please refer to the SureCross™ DX80 Wireless I/O Network product manual, Banner p/n 132607, for installation and waterproofing instructions.
** Operating the devices at the maximum operating conditions for extended periods can shorten the life of the device.
Environmental
Environmental Rating* IEC IP67; NEMA 6
Operating Temperature** -40 to +85° C
Operating Humidity 95% max. relative (non-condensing)
Radiated Immunity 10 V/m, 80-2700 MHz (EN61000-6-2)
Shock & Vibration IEC 68-2-6 and IEC 68-2-7
Shock: 30g, 11 millisecond half sine wave, 18 shocks
Vibration: 0.5 mm p-p, 10-60 Hz
* The range depends upon the environment and line of sight. High-gain antennas are available to increase the range.
* For European applications, power the DX80 from a Limited Power Source as defined in EN 60950-1.