Cut Sheet

Installaon
Wiring Diagrams
Q60BB6xx(Q)
Cabled and QD Models, 10 to 30 V dc
3
1
2
4
5
10-30V dc
Remote
Program
Load
Load
+
–
Q60VR3xx
Cabled Model, 24 to 250 V ac (50/60Hz) or 12 to 250 V
dc
3
5
2
N.C.
C
N.O.
1
4
24 - 250V ac or 12 - 250V dc
Key
1 = Brown
2 = White
3 = Blue
4 = Black
5 = Gray
Q60VR3xxQ1
QD Model, 24 to 250 V ac (50/60Hz) or 12 to 250 V dc
24-250V ac
or 12-250V dc*
*NOTE: Connection of dc power is without regard to polarity.
1
N.O.
C 3 A max. load
2
3
4
Key
1 = Red/Black
2 = Red/White
3 = Red
4 = Green
Set the Cuto Distance
The cuto distance for A60AFV sensors can be adjusted between 200 mm to 1000 millimeters (8 in to 40 in).
To maximize contrast, posion the lightest possible background to be used, at the closest posion it will come to the sensor during use.
Using a small screwdriver in the adjustment screw, adjust the cuto distance unl the threshold is reached and the green Light Sensed
indicator changes state. If the indicator never turns ON, the background is beyond the maximum sensing cuto and will be ignored.
Note the posion of the rotang
cuto posion indicator at this posion. Then repeat the procedure, using the darkest target, placed in
its most distant posion for sensing. Adjust the cuto so that the indicator is midway between the two posions.
Target Background
Cutoff
Distance
E
R2
R1
Figure 3. Set the cuto distance approximately midway between the
farthest target and the closest background
ON
OFF
DELAY
DELAY
DO
SIG
LO
RANGE
I
n
c
r
e
a
s
i
n
g
D
i
s
t
a
n
c
e
Set Cutoff Midway
Between
Farthest Target Object
Closest Background
Figure 4. Seng the cuto distance
Note: Seng the cuto distance adjustment screw to its maximum clockwise posion places the receiver lens
directly in front of the receiver elements and results in the Q60 performing as a long-range diuse sensor.
Q60AFV Series Sensors with Visible Red Emier
P/N 69622 Rev. C www.bannerengineering.com - Tel: [phone]