Cut Sheet

Down and Up Buons
Press Down and Up to:
• Access the Quick Menu from Run mode
• Navigate the menu systems
• Change programming
sengs
• Change individual digit values in distance based sengs
When navigang the menu systems, the menu items loop.
Enter Buon
Press Enter to:
• Access the Sensor Menu from Run mode
• Access the submenus
• Move right one digit in distance based
sengs
• Save changes
In the Sensor Menu, a check mark in the lower right corner of the display indicates that pressing Enter accesses a
submenu.
Press Enter to save changes. New values ash rapidly and the sensor returns to the parent menu.
Escape Buon
Press Escape to:
• Leave the current menu and return to the parent menu
• Return to Run mode from the Quick Menu
Important: Pressing Escape discards any unsaved programming changes.
In the Sensor Menu, a return arrow in the upper le corner of the display indicates that pressing Escape returns to
the parent menu.
Press and hold Escape for 2 seconds to return to Run mode from any menu or remote teach.
Laser Descripon and Safety Informaon
CAUTION: Use of controls or adjustments or performance of procedures other than those
specied herein may
result in hazardous radiaon exposure. Do not aempt to disassemble this sensor for repair. A defecve unit must
be returned to the manufacturer.
Class 2 Laser Models
CAUTION: Never stare directly into the sensor lens. Laser light can damage your eyes. Avoid placing any mirror-like
object in the beam. Never use a mirror as a
retroreecve target.
For Safe Laser Use - Class 2 Lasers
• Do not stare at the laser.
• Do not point the laser at a person’s eye.
• Mount open laser beam paths either above or below eye level, where praccal.
• Terminate the beam emied by the laser product at the end of its useful path.
Reference IEC 60825-1:2007, Secon 8.2.
L-GAGE
®
LTF Time of Flight Laser Distance Sensor
2 www.bannerengineering.com - Tel: [phone] P/N 194136 Rev. D