Cut Sheet

ManualsBrandsBanner Engineering ManualsExtended Indicator LightsK30 Pro with IO-Link Series: RGB Indicator

Table Of Contents

Datasheet

Datasheet

30 mm IO-Link Controlled Multicolor RGB Devices (Indicator and Touch Button)

This datasheet contains limited information on K30 Pro Devices with IO-Link. Go to www.bannerengineering.com and search

215995 to view the K30 Pro Devices IO-Link Data Reference Guide or 215996 to access the K30 Pro IODD File. Use of this

document assumes familiarity with pertinent industry standards and practices.

• IO-Link gives full access to color,

ﬂashing, rotating, and dimming settings as well as advanced animations such as dynamic

sequence mode and LED control

• Output settings, including on and off delays, output function, and output state are also available with IO-Link

• 18 V DC to 30 V DC operation

Indicator

Touch Button

WARNING:

• Do not use this device for personnel protection

• Using this device for personnel protection could result in serious injury or death.

• This device does not include the self-checking redundant circuitry necessary to allow its use in

personnel safety applications. A device failure or malfunction can cause either an energized (on) or de-

energized (off) output condition.

Models

Touch Button Models

• Excellent immunity to false triggering by water spray, oils, and other foreign materials

• Rated IEC IP67 and IP69K per DIN 40050-9

• Can be actuated with bare hands or gloves; adjustable sensitivity

Family

K30

P = Pro

Q = 4-pin integral M12/Euro-style quick disconnect

QP = 150 mm (5.9 in) PVC cable with 4-pin M12/Euro-

style quick disconnect

Connector

Activation Method

T = Touch

Control

K = IO-Link

Material

Blank = Standard

Style

Indicator Models

• Bright, uniform indicator light

• Rated IEC IP67 and IP69K per DIN 40050-9

Family

K30

P = Pro

Q = 4-pin integral M12/Euro-style quick disconnect

QP = 150 mm (5.9 in) PVC cable with 4-pin M12/Euro-

style quick disconnect

ConnectorHousing

L = Dome

Control

K = IO-Link

P L

Style

K30 Pro Devices with IO-Link

Original Document

215851 Rev. C

24 August 2020

215851

Summary of content (8 pages)

PAGE 1
K30 Pro Devices with IO-Link Datasheet 30 mm IO-Link Controlled Multicolor RGB Devices (Indicator and Touch Button) This datasheet contains limited information on K30 Pro Devices with IO-Link. Go to www.bannerengineering.com and search 215995 to view the K30 Pro Devices IO-Link Data Reference Guide or 215996 to access the K30 Pro IODD File. Use of this document assumes familiarity with pertinent industry standards and practices.
PAGE 2
K30 Pro Devices with IO-Link Wiring Diagram Key 3 1 = Brown 2 = White 3 = Blue 4 = Black 18–30 V DC 1 4 IO-Link Communication 2 Not used IO-Link® IO-Link® is a point-to-point communication link between a master device and a sensor and/or light. It can be used to automatically parameterize sensors or lights and to transmit process data. For the latest IO-Link protocol and specifications, please visit www.iolink.com.
PAGE 3
K30 Pro Devices with IO-Link Name Description Sequence Color 1 increments against the background of Color 2 at defined Dynamic or Static Sequence Value (Advanced mode and other modes respectively) Wave Color 2 increases in intensity on the background of Color 1 from one side of the device to the other at the defined speed Animation Direction Defines the direction of rotation for the 50/50 rotate, chase, and sequence animations (CW or CCW) Animation Pattern Defines the flash pattern for flash and tw
PAGE 4
K30 Pro Devices with IO-Link Setting Description Function Latching or Momentary Options. Momentary function toggles output on only during a touch button input. Latching function toggles output on or off for each touch button input Mute Enable Turning on mute disables the touch button input On Delay (ms) Length of time the button needs to be pressed to trigger an active state. 0-60,000 ms Output Settings (Touch Models Only) Use Parameter Data to define the following settings.
PAGE 5
K30 Pro Devices with IO-Link Specifications Default Indicator Characteristics Supply Voltage 18 V DC to 30 V DC Supply Current Indicator Models: 33 mA maximum current at 18 V DC 28 mA typical at 24 V DC Touch Models: 40 mA maximum current at 18 V DC 30 mA typical at 24 V DC Dominant Wavelength (nm) or Color Temperature (CCT) Color Color Coordinates2 Lumen Output (Typical at 25 °C) x y Touch Button Models Indicator Models Green 522 0.154 0.700 7.7 8.7 Red 620 0.689 0.309 3.1 3.
PAGE 6
K30 Pro Devices with IO-Link Dimensions All measurements are listed in millimeters [inches], unless noted otherwise. 30.0 mm (1.18 in) 23.5 mm (0.93 in) 27.0 mm (1.06 in) 57.0 mm (2.24 in) 42.0 mm (1.65 in) 54.5 mm (2.15 in) M22 X 1.5 M12 X 1 M22 × 1.5 M12 × 1 Indicators Touch Buttons Accessories Cordsets 4-Pin Threaded M12/Euro-Style Cordsets—Double Ended Model Length MQDEC-401SS 0.31 m (1 ft) MQDEC-403SS 0.91 m (2.99 ft) MQDEC-406SS 1.83 m (6 ft) MQDEC-412SS 3.
PAGE 7
K30 Pro Devices with IO-Link 4-Pin Threaded M12/Euro-Style Cordsets—Double Ended, Washdown, Stainless Steel Model Length MQDEC-WDSS-401SS 0.31 m (1 ft) MQDEC-WDSS-403SS 0.91 m (2.99 ft) MQDEC-WDSS-406SS 1.83 m (6 ft) Style Dimensions Pinout Female 2 1 40 Typ. 3 4 Male M12 x 1 13.9 Male Straight/ Female Straight MQDEC-WDSS-412SS 1 2 43.5 Typ. 3.66 m (12 ft) 4 3 1 = Brown 2 = White 3 = Blue 4 = Black 13.
PAGE 8
K30 Pro Devices with IO-Link LMB22LPC • For 28 mm tubular racking • Toolless mount to racking • 22 mm mounting hole 45 Ø22 65 43 Ø27.8 All measurements are listed in millimeters, unless noted otherwise. Banner Engineering Corp. Limited Warranty Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engineering Corp.