User guide

14 96815 v.3.0
All 2001 thru (early) 2004 LB7 vehicles
will have an OBD II Interface Cable
in the kit. The OBD II Interface Cable
must be connected in order for the
Six-Gun tuner to function.
All (late) 2004 thru 2005 LLY vehicles
will require an OBD II Interface Cable if
connecting to an optional Banks IQ .
All Vehicles: If not installing the
optional Banks iQ, skip to Section 3.
WARNING: Below 32
o
F (0
o
C) or
above 140
o
F (60
o
C) the Banks iQ
may be susceptible to damage as a
result of extended direct exposure
to sunlight, heat or extreme
cold. It is highly recommended
that the Banks iQ be removed
from its mounting location if the
vehicle will be subjected to high
concentrations of sunlight, heat
or cold for an extended period of
time. Gale Banks Engineering is not
responsible for damage to Banks iQ
resulting from exposure conditions.
CAUTION: Do not use force
when working on plastic parts.
Permanent damage to the part
might result.
1. Locate the Window Mount
Assembly in your kit.
2. Assemble the Banks iQ docking
station to the Universal mount by
inserting and sliding the Universal
mount tab into the docking station
groove. Hand tighten the nut behind
the docking station to hold the docking
station in place.
Section 2
MOUNTING THE DOCKING AND CONNECTING THE BANKS iQ
Figure 5 Attaching Banks iQ to window mount