Instruction Manual

TRIM BRACKETS
20. Remove the 6 bolts (3 per side)
that secure the radiator cross brace.
The bolts are on the bottom side at
each end of the support. Remove the
cross brace from the vehicle.
21. Remove the air box support
bracket shown in Figure 16. There is
an a/c condenser line retaining clip
and a plastic fastener that attaches
to the inner fenderwell that must be
removed before the bracket can be
liberated from the vehicle.
22. Trim the air box support bracket
per the template in Figure 18.
Figure 17 shows the bracket before
and after trimming.
Figure 17 Before and after removing material from the air box support bracket.
Figure 16 Air box support bracket
18 96776 v.11.0