Instruction Manual

5. Remove the grill
a. 2001 to 2002 vehicles: The grill is
retained by (4x)
1
⁄4 turn fasteners,
(1x) screw at the latch support, and
(2x) snaps at the outboard ends of
the grill. Depress the snaps at the
ends of the grill before attempting to
remove the grill from the vehicle.
b. 2003 to 2005 vehicles: Disengage
the snaps at the outboard ends
of the grill. Pull the grill from the
vehicle.
6. Rotate the headlamp-retaining
pin, then remove the pin as shown in
Figure 10a.
Note: Some GMC models depending
on model year may have a two
headlamp-retainer pin. Remove the
two retainer pins from headlamp
assembly as shown in Figure 10b.
7. Disconnect the connectors
from the backside of the headlamp
assembly, and remove from the
vehicle. Repeat for the driver and
passenger side headlamp assemblies.
8. Remove the park/turn signal
lamp assembly by depressing the
outboard retaining clip, then rotating
the assembly outward as shown in
Figure 11. The headlamp is easily
disengaged and does not require
force to be removed once the
outboard clip has been depressed.
Figure 10a Headlamp assembly removal, Chevy
Figure 10b Headlamp assembly removal, GMC
Figure 11 Parking lamp assembly removal
96776 v.11.0 15